SL
Utility/Skid Loader Trailer
CAPACITY
• 11,000 lbs. Load Capacity
• Approx 2,800 lbs. Curb Weight
• 14,000 lbs. GVWR (Calculated at 15% Tongue Weight)
DIMENSIONS
• 16’ Deck Length
• 60” Tongue Length
• 102” Overall Width
• 81” Deck Width Between Fenders
• 16” Deck Height
AXLES
• 6000# Tandem Dexter Torflex Axles
• 12” x 2” Electric Brakes on All Wheels
• 8 Bolt Hubs
• (4) four - ST235/80R16 LR-E Tires
• (4) four - 16” x 6” White Mod Wheel (8 Hole on 6 1/2“ Bolt Circle)
• Fenders, Fabricated from 1/8” Steel Tread Plate
LOADING RAMPS
• 54”L x 18”W Self-Supporting / Adjustable / Removable Ramps
• Vertical Slide Latch System Holds Ramps in Vertical Position
• Low Loading Angle - 16” Deck Height
TONGUE HITCH & JACK
• 6” X 2” Tubular Upper Tongue
• 5” x 2” Tubular Lower Tongue
• 2 5/16” Ball Coupler or 2 1/2” Lunette Eye (Your Choice)
• 6-Position Adjustable Hitch Plate
• 10,000 lbs. Drop Leg Jack
• 3/8” Galvanized Safety Chains with Safety Latch Hooks and Anchor Shackle
MAIN FRAME
• 7” x 4” x 3/8” Angle Frame
• 3” Channel Crossmembers
• Stake Pockets (5 per side)
FLOORING
• 2” Oak Deck - Installed with 1/4” Floor Screws
• Each Board Anchored Both Ends With 5/16” Carriage Bolts
12 VOLT WIRING SYSTEM
• ICC & DOT Approved Lights
• Sealed Beam Rubber Mounted Stop, Turn, Tail and Marker Lights
• S.O. Cable Wiring Loom, Clamped on 16” Centers with Rubber Lined Clamps
• Wiring Loom Terminated in Junction Boxes
• Connections Soldered and Sealed with Heat Shrink Tubing
• 32” Pigtail w/ 6-Way Aluminum Die Cast Plug, Terminated at Junction Box
• Breakaway Kit, with Sealed lead Acid Battery & Trickle Charger
PAINT
• Trailer is Completely Sandblasted
• Seams are Sealed with Paintable Caulk
• Rust Prohibitive Two-Part Epoxy Polyamide Primer
• Two-Part Acrylic Polyurethane Topcoats (Standard Colors Black and White)
• All Attachments Painted before Assembly and Installed with Serviceable Fasteners
• 2” Red/White Reflective Tape on Both Sides of Trailer
Options
DECK LENGTH VARIATIONS
- Length Variation (per ft.)
AXLE OPTIONS
- 7,000 lbs. In Lieu of 6,000 lbs. Axles
12" x 2" Electric Brakes,
ST235/80R16 LR-E Tires, 8 Hole White Mod Wheels
Payload 13,000 Lbs - GVWR 16,000 - 7,200 lbs. In Lieu of 6,000 lbs. Axles
12 ¼" x 2 ½" Electric Brakes,
ST235/85R16 LR-G Tires, 8 Hole White Mod Wheels
Payload 13,500 Lbs - GVWR 16,700 - 8,000 lbs. In Lieu of 6,000 lbs. Axles (8" x 4" x ¼" Main Frame) ****79" BETWEEN FENDERS****
12 ¼" x 3 3/8" Electric Brakes,
215/75R17.5 LR-H Tires, 8 Hole Single Wheels
Payload 14,500 Lbs - GVWR 18,800 - Surge Brake w/ 20K Adj. 3" Eye
W/ 20K Adj. 2 5/16" Ball Coupler - Electrastar Brake Actuator (Trailer Mounted)
with In-Cab Controller (Meets DOT Requirements for Rental Application) - Replacement Electrastar In-Cab Controller
OPTIONAL SPARE TIRE/WHEEL
- Spare Tire / Wheel (6K & 7K Axle) - ST235/80R16 LR-E Tires
- Spare Tire / Wheel (7.2K Axle) - LT235/85R16 LR-G Tires
- Spare Tire/Wheel (8K Axle) - 215/75R17.5 LR-H Tires
- Spare Tire / Wheel Holder (for trailer or skid loader)
OPTIONAL JACKS, COUPLERS AND TOOL BOX
- 12,000 lbs, Jack in Lieu of 10,000 lbs.
- 3" Lunette Eye in Lieu of 2 1/2"
- Replacement or Additional 2 1/2" Lunette
- 2 5/16" Ball Coupler (Trailer GVWR 16,000 - 20,000 lbs)
- Tool Box Mounted in Tongue
- Gooseneck with Adjustable Height 2 5/16" Ball Coupler
- Gooseneck with Adjustable Height Binkley Inverted 5th Wheel
OPTIONAL MATERIAL RACKS & PALLET FORK CARRIERS
- 3) Three Removable Side Racks,
For Carrying Long Items like Pipe or Rebar above the Fenders
Mounted On Curbside or Roadside - Pallet Fork Carrier with Ratchet Strap, Mounted on Road Side
Carry Detachable Forks with Ease
MISC. OPTIONS
- 66"L x 18"W Wood Inlaid Spring Assist Ramps with 1/4" Steel Entrance Plate
In Lieu of Standard Ramps (For Rollers and Low Ground Clearance Equipment) - Springs for Spring-assisted Ramps (Pair)
- Rub Rail
- LED Lights (in Lieu of Standard)
- 5/8" D-Rings, 19,000 lb. Capacity (Price Per D-Ring)
- Visible Registration Holder
- Backup Lights, Sealed Beam Rubber Mounted