Brooks Brothers Logo Trailer
Red Horizontal Bar
 

9 - 12 Ton Payload

Specifications Page | Back to Trailers Page


 


Model OW202-10K shown


Model OW202-10K shown

Standard Features


Optional Gooseneck Hitch


Jack Handle Extension


Spring Assist Ramps


  • 16,000 lbs. Load Capacity
  • 21,000 lbs. GVWR
  • 20’ Flat Deck Length
  • 5’ Beavertail, Self-Cleaning on 10 Degree Angle
  • 60”L x 18”W Spring Assist Ramps
  • 60” Tongue Length
  • 100” Overall Width
  • 33 1/2” Deck Height
  • 9000# Tandem Dexter Axles
  • Oil Bath Hubs
  • Electric Brakes on All Wheels
  • Slipper Spring Suspension
  • ST235/80R16 LR-E Tires
  • Dual Wheels
  • Mud Flaps
  • 12” Wide Flange Main Frame Beam
  • 2 1/2” Lunette Eye
  • 6-Position Adjustable Hitch Plate
  • 3/8” Galvanized Safety Chains
  • Binkley Model 48000 Drop Leg Jack
  • 3” Crossmembers Pierced Through Main Frame
  • 6” Channel Side Rails
  • 6” Channel Headboard
  • Stake Pockets (7 per side)
  • 2” Oak Deck - Installed with 1/4” Floor Screws
  • Each Board Anchored Both Ends with 5/16” Carriage Bolts
  • ICC & DOT Approved Lights
  • Sealed Beam Rubber Mounted Lights
  • Steel Mud Guards on Beavertail to Protect Lights and Wiring
  • S.O. Cable Wiring Loom
  • Wiring Loom Terminated in Junction Boxes
  • Connections Soldered & Sealed with Heat Shrink Tubing
  • 32” Pigtail w/ 6-Way Aluminum Die Cast Plug
  • Breakaway Kit with Trickle Charger
  • Trailer is Completely Sandblasted
  • Seams are Sealed with Paintable Caulk
  • Rust Prohibitive Two-Part Epoxy Polyamide Primer
  • Two-Part Acrylic Polyurethane Topcoats
  • 2” Red/White Reflective Tape

 Also Available:

  • 10K & 12K Axles (18,000 lb. & 23,000 lb. Load Capacity)
  • ABS Air Brakes


Carriage Bolted Deck


Optional Deckover Platform

Brooks Brothers Trailers is a proud member of the National Association of Trailer Manufacturers

Brooks Brothers Trailers a Division of MORAN WELDING, INC

 
Web site design by designsby.us