 |
| |
14' Tilt Deck Trailers
Specifications Page | Back to Trailers Page
|
|
 |
Model
SLT141-7K shown
Model SLT141-7K shown
Standard Features
Adjustable Hitch
|
Spring Loaded Deck Release
|
Tapered Ramps
|
|
- 6000 lbs. Load Capacity
- 8200 lbs. GVWR
- 14’ Tilt Deck Length
- 12” Entrance Ramp
- 60” Tongue Length
- 102” Overall Width
- 81” Deck Width Between Fenders
- 16” Deck Height
- 7000# Single Dexter Torflex Axles
- 8 Bolt Hubs
- Electric Brakes on All Wheels
- ST235/80R16 LR-E Tires
- White Mod Wheels
- Fenders, Fabricated from 1/8” Steel Tread Plate
- Tilt Deck with Low Loading Angle
- Spring Loaded Tilt Deck Latching System
- 2 5/16” Ball Coupler or 2 1/2” Lunette Eye (Your Choice)
- 6-Position Adjustable Hitch Plate
- 3/8” Galvanized Safety Chains
- 7000 lbs. Drop Leg Jack
|
- 7” x 4” x 3/8” Angle Frame
- 3” Channel Crossmembers
- Stake Pockets (4 per side)
- 2” Oak Deck - Installed with 1/4” Floor Screws
- Each Board Anchored Both Ends with 5/16” Carriage Bolts
- ICC & DOT Approved Lights
- Sealed Beam Rubber Mounted Lights
- S.O. Cable Wiring Loom
- Wiring Loom Terminated in Junction Boxes
- Connections Soldered & Sealed with Heat Shrink Tubing
- 32” Pigtail w/ 6-Way Aluminum Die Cast Plug
- Breakaway Kit, with Trickle Charger
- Trailer is Completely Sandblasted
- Seams are Sealed with Paintable Caulk
- Rust Prohibitive Two-Part Epoxy Polyamide Primer
- Two-Part Acrylic Polyurethane Topcoats
- 2” Red/White Reflective Tape
Also Available:
- Electrastar Brake Actuator with In-Cab Controller
(Meets DOT Requirements for Rental Application) |
Carriage Bolted Deck
|
Stake Pockets
|
Brooks Brothers Trailers is a proud member of the National Association of Trailer Manufacturers Brooks Brothers Trailers a Division of MORAN WELDING, INC |
|
 |
Home | Trailers | Parts & Service | Sales | Contact Us | Map/Directions | Printable Flyers | Find a Dealer
sales@brooksbrotherstrailers.com
©2006 Brooks Brothers Trailers. All rights reserved.
|
