Print

PT-122

Combo/Pole Trailer


CAPACITY

• 13,500 lbs. GVWR - Calculated at 15% Weight Transfer to Tow Vehicle
• 10,200 lbs. Load Capacity

DIMENSIONS

• Length Adjustments: 24’ / 31’ / 38’
• Cargo Bed: 12’L x 64”W x 15”H
• Overall Width: 86”
• Bolster Height: 42” (45” with Optional Removable Bolsters)

AXLES

• 6000 lbs. Tandem Straight Axles - (Optional Axles: 7K & 8K)
• 12” x 2” Electric Brakes on All Wheels
• Rubber torsion Suspension
• (4) four - ST235/80R16 LR-E Tires, Capacity 3,042 lbs. each, Single Wheel Application
• (4) four - 16” x 6” Single Wheels (8 Hole on 6 1/2" Bolt Circle)
• (1) Pair - Mud Flaps
• (1) Pair - Fender Mounted Wheel Chock Holders (Wheel Chocks Not Included)

POLE BOLSTERS

• Front Bolster: 45”W Fixed (Mounted on Extendable Tongue)
• Center Bolster: 64”W with Pole Stops (Built into Front Wall of Cargo Bed)
• Rear Bolster: 64” W with Pole Stops (Built into Tailgate - 2”x2” Tubular Construction)
• (4) four - Heavy Duty Ratchet Type Winch Binders with Breaker Bar
• (4) four - 15’ L x 4” W x 12000 lbs. Nylon Straps

POCKETS FOR REMOVABLE REEL RACKS

• (1) pair - 3” Receiver Tubes, Mounted inside Cargo Bed Sidewalls

TONGUE & HITCH

• 8” x 4” x 1/4" Wall Extendable Tongue with Lubricated Steel Wear Pads
• 6-Position Adjustable Hitch Plate
• 2 1/2" Lunette Eye, 42,000 lbs. Capacity
• 3/8” x 36” Safety Chains with Safety Hooks and Anchor Shackles

A-FRAME & JACK

• 6” x 2” Tubular Steel A-Frame
• Fixed Binkley, Model 48000 Drop Leg Jack, 12,000 lb. Static Load Capacity

MAIN FRAME

• 6” x 3” Tubular Steel Main Frame
• 10” x 6” Receiver Tube
• 7” x 3“ Tubular Steel Crossmembers Under Center and Rear Bolsters
• 3” Structural C-Channel Crossmembers on 14 1/2” Centers Under Cargo Bed Floor

CARGO BED

• Interior Dimensions: 142”L x 64”W x 15”H with Reinforced Fold Down Tailgate
• Floor: 1/8” Smooth Steel Construction
• Sidewalls: 12 Gauge Formed in Brake for Added Strength
• Tailgate: Tubular Construction, w/ Offset Hinges so Debris is Easily Cleared
• (4) four - 5/8” D-Rings, 19,000 lbs. Capacity each, Floor Mounted (1) one each Corner

FENDERS & CATWALK

• Fabricated 1/8” Steel Diamond Tread Plate Fender Construction
• (4) four - Roll-Off Fender Guards, Prevents Damage to Fenders when “Wrecking”

TOOL BOX

• Tool Box Dimensions: 14”H x 24”D x 64”W
• Fabricated from 1/8” Smooth Steel Integrated Construction
• (2) Side Entry Doors Key Locked with Twist Latches
• Weather Tight Rubber Gaskets

12 VOLT WIRING SYSTEM

• ICC & DOT LED Approved Lights
• LED sealed Beam Rubber Mounted Stop, Turn, Tail and Marker Lights
• S.O. Cable Wiring Loom, Clamped on 16” Centers with Rubber Lined Clamps
• Wiring Loom Terminated in Junction Boxes
• Connections Soldered and Sealed with Heat Shrink Tubing
• Internal Wiring In Tongue Extension, Receptacle At Each Pin Location
• 36” Pigtail w/ 6-Way Aluminum Die Cast Plug, Terminated at Junction Box
• 6-Way Aluminum Die Cast Plug (Truck Side) in Rear Butt Tube for Light Bar Hook-Up
• Breakaway Kit with Sealed Lead Acid Battery & Trickle Charger

PAINT

• Trailer is Completely Sandblasted
• Seams are Sealed with Paintable Caulk
• Rust Prohibitive Two-Part Epoxy Polyamide Primer
• Two-Part Acrylic Polyurethane Topcoats (Standard Colors White and Safety Yellow)
• All Attachments Painted before Assembly and Installed with Serviceable Fasteners


Options

AXLE OPTIONS

  • 7000 lb. Tandem - Payload: 12,000 lbs.  GVWR 15,000 lbs.
    Electric Brakes
    (4) four - ST235/80R16 LR-E, (14 Ply) Capacity 3,520 lbs.
  • 8000 lb. Tandem - Payload: 13,500 lbs.  GVWR 16,500 lbs.
    Electric Brakes
    (4) four - 215/75R/17.5 LR-H, Capacity 4,805 lbs.

OPTIONAL SPARE TIRE & WHEEL

  • ST235/80R16 LR-E    (6 & 7K Axle)
  • 215/75R/17.5 LR-H     (8K Axle)
  • Rubber Wheel Chocks, 7"H x 10"L x 8"W

FRONT BOLSTER OPTIONS (MOUNTED ON EXTENDABLE TONGUE)

  • 64"W Tubular Bolster,
    Pole Stops, Winch Binder and Nylon Strap  (In Lieu of 45" Front Bolster)
  • U-Type Single Pole Cradle
    Winch Binder and Nylon Strap  (In Lieu of 45" Front Bolster)
  • 60"W (45" ID) 3" Double C-Channel Bolster,
    Winch Binder and Nylon Strap  (In Lieu of 45" Front Bolster)
    with 9" Chain Adjusted Stanchions
    with 21" Lever Lock Stanchions
  • (4) - 30' L Nylon Winch Strap in Lieu of 15'

OPTIONAL REMOVABLE BOLSTERS (CENTER & REAR)

  • 89" Wide Removable 3" Double C-Channel Bolsters
    Includes Your Choice of Stanchions:
    with 9" Chain Adjusted Stanchions
    with 21" Lever Lock Adjusted Stanchions

REMOVABLE REEL RACK OPTIONS

  • (1) pair - 36"H Reel Stands with 3" Receivers Tubes
    (Reel Bar Not Included)
  • Additional (1) pair - 3" Receiver Tubes Only
  • 2 7/8" Reel Bar with (2) Locking Collars

  •  Standard Reel Rack Package"
    (1) pair - 36"H Reel Stands
    (1) pair - 3" Receiver Tubes
    (1) 2 7/8" Reel Bar with (2) Locking Collars
    Maximum Reel Size - 68"D x 50"W x 2,200 lbs. Capacity

  • Reel Rack with HD Bronze Bushings Package
    (1) pair - 36"H Reel Stands with Bronze Bushings
    (1) pair - 3" Receiver Tubes
    (1) 2 7/8" Reel Bar with (1) Crossarm and (1) Locking Collar
    Maximum Reel Size - 68"D x 50"W x 3,500 lbs. Capacity

OPTIONAL REEL RACKS WITH OVERSPIN/TENSIONING BRAKES

  • 8" Overspin Brake Package
    8" Brake w/ 8" x 7/16" Solid Stainless Steel Disc, Cast Aluminum Caliper and Tension Adjusting Handle
    (1) pair - 36"H Reel Stands with Bronze Bushings
    (1) 2 7/8" Reel Bar with (1) Crossarm and (1) Locking Collar
    Maximum Reel Size 68"D x 48"W x 2,500 lbs

  • 12" Medium Duty Tensioning Brake Package
    12" Tension Brake w/ 12" x 5/8" Solid Bronze Disc, Cast Steel Caliper and Tension Adjusting Handle
    (1) pair - 36"H Reel Stands with Heavy Duty Bronze Bearings
    (1) 2 7/8" Reel Bar with (1) Crossarm and (1) Locking Collar
    Maximum Reel Size 68"D x 48"W x 3,000 lbs

HITCH & JACK OPTIONS

  • 3" Lunette Eye  (In Lieu of 2 1/2" Eye)
  • Visible Registration Holder
  • Full Width Jack Handle Extension:
    Add to One Side
    Add to Both Sides  (Requires Store-Away Handle)

CARGO BED OPTIONS

  • (4) - 9"Wide & 9"Deep Open Top Storage Bins
    Located Front and Rear of Fenders to Roll-Off Fender GuardS
  • Additional D-Rings
  • Chains on Tailgate

WIRING & LIGHT BAR OPTIONS

  • Light Bar
    (2) Rubber Mounted Sealed Beam Lights (Stop Turn and Tail)
    36"L x 4" x 4" Tubular Steel Body
    Chain Adjusted Mounting Base
    25' of Cable with 6-Way Aluminum Die Cast Connector
  • Warner 6-Way Connector
    in Lieu of Standard 6-Way Connector
  • Solar Charged Breakaway Kit
    In Lieu of Standard Kit