Print

SLRT Capillary Deployment


Gooseneck shown in photos is optional.

CAPACITY:
16,400 # GVWR-Calculated at 15% Weight Transfer to Tow Vehicles
12,500 # Approx.  Load Capacity

DIMENSIONS:
Overall Length: 
Overall Width:  101" Max
Reel Size:  (1) One 96"D x 60"W x 3" Center Hole

AXLES: 
7,000# Tandem Torflex Axles
12" x 2" Electric Brakes on All Wheels
(4) Four - 235/80R16 LR-E Tires
(4) Four - 16" x 6" Single Wheels (8 Holes on 6 1/2" Bolt Circle)

REEL RACK:
Twin 4" Lift Cylinders Operated off, Lever Activated Control Valve
Heavy Duty Bronze Bushings
Includes 2 7/8" Reel Bar with Cross Arm and Locking Collar
Hydraulic Take Up / Pay Out Assembly - 2,100 lbs of Line Pull
Payout Assembly Operated via Remote Foot Pedal - Controls Direction Only
Speed is Controlled by Flow Control Mounted on Trailer
16" Heavy Duty Tensioning Brake
Deutz Diesel Engine Model D2011L03i
15 GPM / 9 GPM Tandem Pump Assembly - GPF20R20/12-PC
15 GPM - Compressor Circuit
9 GPM - Load / Unload, Payout / Take Up and Jack Circuit
20 Gallon Reservoir
10 Micron Spin on Filter
2,250 psi Continuous
2,900 psi Intermittent
Hydraulic Controls to be Placed Near Front on Roadside of Trailer

COMPRESSOR:
SHD - 60 American Eagle Compressor
30 CFM @ 100 psi
Remote Air Tank
Hydraulic Requirements - 11 GPM @ 1,850 psi

Supply and Mount Two 12 Gallon Plastic Tanks

TONGUE, HITCH & JACKS:
6" x 3" x 3/16" Steel Tubing
Adjustable Gooseneck with 2 5/16" Ball Coupler
3/8" x 36"L Galvanized Safety Chains
(3) Hydraulic Jacks, One Mounted at Front and Two Rear Stabilizing

MAIN FRAME: 
6" x 4" x 1/4" Steel Tube Main Frame
6" x 3" x 1/4" Steel Tube Lifting Arms
Steel Treadplate Floor

FENDERS:
Fabricated 1/8" Steel Diamond Tread Plate Fenders

Conspicuity Tape, Both Sides, Rear and Tongue, Meets DOT and NHTSA Standards

12 VOLT WIRING SYSTEM:
ICC & DOT Approved Lights
Sealed Beam Rubber Mounted Stop, Turn, Tail & Marker Lights
S.O. Cable Wiring Loom, Clamped on 16" Centers with Rubber Lined Clamps
Wiring Loom Terminated in Junction Boxes
Connections Soldered & Sealed with Heat Shrink Tubing
32" Pigtail w/6-Way Plug, Terminated at Junction Box
Breakaway Kit with AGM (Absorbed Glass Mat) Battery & Trickle Charger

PAINT:
Trailer is Completely Sandblasted
Seams are Sealed with Paintable Caulk
Rust Prohibitive Two-Part Epoxy Polyamide Primer
Two-Part Acrylic Polyurethane Topcoats - Black
All Attachments Painted before Assembly & Installed with Serviceable Fasteners


Options