Print

2TRT

Turret Cable Reel Trailer


CAPACITY

  • 16,450 lb. GVWR-Calculated at 15% Weight Transfer to Tow Vehicles
  • Approx. 12,450 lb. Load Capacity

DIMENSIONS

  • Overall Length: 18'
  • A-Frame: 6'
  • Cargo Bed: 12'L x 72"W Max
  • Overall Width: 101" Max
  • Reel Size: (2) Two 72"D x 54"W x 3" Center Hole

AXLES

  • 7,000 lb. Tandem Torflex Dexter Axles (better ride and less maintenance than leaf
  • spring)
  • 12" x 2" Electric Brakes on All Wheels
  • (4) Four - 235/80R16 LR-E Tires
  • (4) Four - 16" x 6" Single Wheels (8 Holes on 6 1/2" Bolt Circle)
  • (1) Pair Mud Flaps

REEL RACKS

  • (2) Two -Revolving Turret Reel Assemblies Lockable Every 15 Degrees with Heavy Duty Cam Followers (4) Per Turret Assembly, each Cam Follower Rated at 4,840 lbs cap ea.
  • (2) Two - 2 7/8" Reel Bars with Crossarm and (1) One Locking Collar, Rotating in Heavy Duty Bronze Bearings

TONGUE, HITCH & JACKS

  • 12" x 16 lb. Wide Flange Beam
  • 6-Position Adjustable Hitch Plate (14" through 27")
  • 2 1/2" Lunette Eye, 42K Capacity
  • 3/8" x 36"L Safety Chains 5,400 lb Working Load, 21,000 lb Breaking
  • Load with Safety Hooks and Anchor Shackles For Easy Replacement of Damaged
  • Safety Chain
  • (1) One Fixed Heavy Duty Binkley, Model 48000 Dropleg Jack, 12.000 lb Static
  • Load Capacity on Tongue
  • (2) Two Pinnable Drop Leg Jacks Both Sides Located at Rear of Trailer
  • Stabilizing
  • Registration Holder with Clear Lexan Glass and Gasket

MAIN FRAME

  • 12" x 16 lb Wide Flange Beam Main Frame
  • 8" C-Channel Crossmembers at Turret Locations
  • 3" C-Channel Crossmembers on approx. 16" Centers Throughout

CARGO BED

  • Oak or Steel Deck

CATWALK

  • 1/8" Steel Diamond Tread, Mounted on 4" x 2" Tubular Perimeter Frame
  • Full Length of Cargo Bed, Fore and Aft of Fenders

FENDERS

  • Fabricated 1/8" Steel Diamond Tread Plate Fenders
  • Integrated Constructions with Catwalk
  • Conspicuity Tape, Both Sides, Rear and Tongue, Meets DOT and NHTSA Standards

12 VOLT WIRING SYSTEM

  • ICC & DOT Approved LED Lights
  • Sealed Beam Rubber Mounted Stop, Turn, Tail & Marker LED Lights
  • S.O. cable wiring harness run internally wherever possible. External wiring is clamped on 16" centers with rubber lined clamps
  • Wiring Loom Terminated in Junction Boxes
  • Connections Soldered & Sealed with Heat Shrink Tubing
  • 32" Pigtail w/ Plug***TBD***, Terminated at Junction Box
  • Breakaway Kit with AGM (Absorbed Glass Mat Battery & Trickle Charger), Even if Battery Casing is Damaged, It will not Leak and Continue to Function

PAINT

  • Trailer is Completely Sandblasted
  • Seams are Sealed with Paintable Caulk
  • Rust Prohibitive Two-Part Epoxy Polyamide Primer
  • Two-Part Acrylic Polyurethane Topcoats - WHITE, RED, BLACK and SAFETY YELLOW Std
  • All Attachments Painted before Assembly & Installed with Serviceable Fasteners

Options

REEL RACK OPTIONS

  • 12" Tensioning Brake
  • 16" Tensioning Brake
  • Hydraulic Retriever

WIRING SYSTEM

  • Solar Charged Break-Away Battery