Print

PTB -111-22.5KA

PTB-111-22.5KA


Length Adjustments:  24’  /  31’  /  39’ 9"
Overall Width:  95”
Bolster Height:  45”

25,900 lbs GVWR
21,500 lbs Approx Payload

22,500 lbs. Single Axle
Oil Bath Hubs, 8 Studs
Air Brakes with ABS
Heavy Duty Hutch Suspension
(4) Four - 11-R22.5 Tires
(4) Four - 22.5” Wheels
Pair - Mud Flaps

Front Bolster:  95”W Double "C" Channel Front Bolster With 30" Lever Lock Stanchions
Center Bolster:  95”W Fixed 5” Double C-Channel Construction with 30” Stanchions
Rear Bolster:  95”W Fixed 5” Double C-Channel Construction with 30” Stanchions
Stanchions:  (6) four - 30” Lever Lock, Sliding & Removable
(4) four - Heavy Duty Ratchet Type Winch Binders with Breaker Bar
(4) four - 30’ L x 4” W x 12000 lbs. Nylon Straps

Flip Up Bolster Installed Just Ahead of Centerline of Axle, Double C-Channel, Will Except 30" Tall Sliding Stanchions, Includes Winch Binder and Strap Hook. Height to be Determined

8” x 4” x 1/4" Wall Extendable Tongue with Roller and  UHMW-PE Wear Pads
6-Position Adjustable Hitch Plate
2 1/2" Lunette Eye, 35000 lbs. Capacity
3/8” x 36”L Galvanized Safety Chains with Safety Hook and Anchor Shackle
7” Structural C-Channel A-Frame
Fixed Binkley, Model 48000 Drop Leg Jack, 12,000 lb. Static Load Capacity

7” x 4” Tubular Steel Frame
10” x 6” Receiver Tube
7” x 4 “ Tubular Steel Crossmembers Under Rear Bolster
3” Structural C-Channel Crossmembers
Fabricated 1/8” Steel Diamond Tread Plate Fender Construction
Reinforced with 3” Structural C-Channel at Front and Rear of Fender
12 gauge Steel Floor

48" Frame Mounted Tool Box

ICC & DOT Approved Lights
Sealed Beam Rubber Mounted Stop, Turn, Tail and Marker Lights
S.O. Cable Wiring Loom, Clamped on 16” Centers with Rubber Lined Clamps
Wiring Loom Terminated in Junction Boxes
Connections Soldered and Sealed with Heat Shrink Tubing
7-Way Tractor Trailer Plug
6-way Aluminum Die Cast Plug (in rear butt tube)
Breakaway Kit with AGM  Battery & Trickle Charger

Trailer is Completely Sandblasted
Seams are Sealed with Paintable Caulk
Rust Prohibitive Two-Part Epoxy Polyamide Primer
Two-Part Acrylic Polyurethane Topcoats
All Attachments Painted before Assembly and Installed with Serviceable Fasteners


Options