Print

PTB 30-46

PTB 30-46


PTB 30-46 - 20KA Extendable Pole Trailer

Retracted Length:  30’
Extended Length: 46'
Overall Width:  95”
Bolster Height:  56”

22,500 lbs. Single Dexter  Axle
Oil Bath Hubs, 8 Studs on 275mm bolt circle
Air Brakes on both wheels
ABS Equipped
Auto Slack Adjusters
Hutch 9700 suspension
Reinforced Spring Hangers with 3” Structural C-Channel Crossmembers
(4) 11R22.5 Tires
(4) 22.5" 8 Bolt Dual Wheels
Pair - Mud Flaps
(2) two - Pair Wheel Chock Holders with rubber anti skid wheel chocks Under Deck Both Sides Near Axles. Holders to have retaining mechanism for road travel.

Front Bolster:  95" Double C-Channel Construction with (2) 21" tall Lever Lock Stanchions
Center Bolster:  95”W Fixed 5” Double C-Channel Construction (2) 21" Lever Lock stanchions
Rear Bolster:  95”W Fixed 5” Double C-Channel Construction with (2) 21" tall Lever Lock stanchions
Stanchions:  (6) Six - 21" tall Lever Lock stanchions
(4) Four - Heavy Duty Ratchet Type Winch Binders mounted on street side with Breaker Bar
(4) Four - 15’ L x 4” W x 12000 lbs. Nylon Straps

8” x 4” x 1/4" Wall Extendable Tongue with Extension Assist Roller and replaceable UHMW-PE Wear Pads
2" King Pin
3/8” x 36”L Galvanized Safety Chains with Safety Hook and Anchor Shackle
7” Structural C-Channel A-Frame
12,000 lb Dropleg Jack Mounted at the tongue receiver tube

*(2) Aluminum Under Body Toolboxes: 18" x 18" x 48"L

7” x 4” Tubular Steel Frame
10” x 6” Receiver Tube
7” x 4 “ Tubular Steel Crossmembers Under Rear Bolster
3” Structural C-Channel Crossmembers
Fabricated 1/8” Steel Diamond Tread Plate Fender Construction
Reinforced with 3” Structural C-Channel at Front and Rear of Fender
12 gauge Steel Floor Between Center and Rear Bolster

ICC & DOT Approved LED Lights
Sealed Beam Rubber Mounted Stop, Turn, Tail and Marker Lights
S.O. Cable Wiring Loom, Clamped on 16” Centers with Rubber Lined Clamps
Wiring Loom Terminated in Junction Boxes
Connections Soldered and Sealed with Heat Shrink Tubing
Internal Wiring in Tongue, Plug Receptacle Located at Each Pinnable Location, Eliminates Coil Cord
32” Pigtail w/Electrical Plug, Terminated at Junction Box
6-Way Aluminum Die Cast Plug (Truck Side) in Rear Butt Tube for Light Bar Hook-Up
Breakaway Kit with Sealed Lead Acid Battery & Trickle Charger


Options