Print

PTB-112

Pole Trailer


Base unit weight:  4,300 lb. 

  • 22,000 lbs. GVWR - calculated at 10% weight transfer to tow vehicle
  • 17,700 lbs. load capacity (based on 10K axles)

DIMENSIONS 

  • Retracted and extended length adjustments: 25' /32' / 40'
  • Cargo bed (inside dimensions): 39" x 119"
  • Overall width:95"
  • Bolster height:42"

 AXLES  (standard) 

  • Tandem 10,000 lbs. axles (Optional axles: 12K 16K)
  • Oil bath hubs
  • electric brakes
  • Slipper spring suspension
  • Adjustable spring pads for axle alignment
  • Reinforced spring hangers with 3" structural channel
  • (4) four - ST235/80R16 LR-E tires, 3000 lb. capacity per tire in dual application
  • (4) four - 16" x 6" dual wheels (8 hole on 6 1/2" bolt circle)

 POLE BOLSTERS 

  • Front removable/adjustable bolster: 45" wide tubular bolster (mounted on extendable tongue)
  • Center bolster: 5" double "C" fabricated bolster with 21" lever lock stanchions
  • Rear bolster: 5" double "C" fabricated bolster with 21" lever lock stanchions
  • Pole cradle: Single pole cradle at front of A-frame tongue for center pole
  • (4) four - Heavy duty ratchet-type winch binders with breaker bar
  • (4) four - 15' long x 4" wide x 12,000 lbs. nylon straps

TONGUE & HITCH 

  • 8" x 4" x 1/4" wall extendable tongue with UHMW polyethylene wear pads
  • 6-Position adjustable hitch plate
  • 2 1/2" Lunette eye, 42,000 lbs. capacity
  • 3/8" x 36" long safety chains with safety hooks to match trailer GVWR
  • Extendable tongue is attached to trailer with removable, bolt-on collar with greaseable roller for easy extending and retracting

 A-FRAME & JACK

  • 7" structural channel A-frame tongue supports set on offset for increased strength
  • Drop leg jack (12,000 lb. static load capacity)

MAIN FRAME 

  • 7" x 4" tubular steel main frame
  • 10" x 6" receiver tube for extendable tongue
  • 7" x 4" tubular steel crossmembers under center and rear bolsters
  • 3" structural C-channel crossmembers
  • 6 stake pockets for additional tie down


FENDERS  

  • Fenders: 1/8" steel diamond tread plate fender construction
  • One pair mud flaps

12 VOLT WIRING SYSTEM

  • ICC & DOT approved lights and conspicuity tape
  • Sealed beam, rubber mounted stop, turn, tail and marker lights
  • S.O. cable wiring harness run internally wherever possible. External wiring is clamped on 16" centers with rubber lined clamps
  • Wiring harness is terminated in junction boxes
  • Wiring connections are soldered and sealed with heat shrink tubing
  • Extendable tongue is wired internally with 6-way receptacles at each pin location
  • 36" wiring pigtail with 6-Way aluminum die cast plug terminated at junction box
  • 6-Way aluminum die cast electric socket (Truck Side) in rear butt tube for light bar hook-up
  • Breakaway kit with absorbed glass matt (AGM) battery & trickle charger

PAINT

  • Trailer is completely sandblasted
  • Seams are sealed with paintable caulk
  • Rust prohibitive two-part epoxy polyamide primer
  • Two-part acrylic polyurethane topcoats (standard colors: white and safety yellow)

All attachments painted before assembly and installed with serviceable fasteners


Options

AXLE UPGRADES - ELECTRIC BRAKES

  • 12,000 lbs. axles - GVWR: 25,980 lb. Payload: 21,500 lb.

(4) four - ST235/80R16 LR-E tires, 3000 lb. capacity per tire in dual application

(4) four - 16" x 6" dual wheels (8 hole on 6 1/2" bolt circle)

 

  • 16,000 lb axles - GVWR: 30,000 lb. Payload: 25,000 lb.

(4) four - 215/75R-17.5 LRH tires, 4540 lb. capacity per tire in dual application

(4) four - 17.5" x 6" dual wheels (8 hole on 275mm bolt circle)

 AXLE UPGRADES - AIR BRAKES 

  • 10K - 16K axles are available with air brakes

Anti-lock brakes (ABS) and spring brakes

Auto slack adjusters

Air line pluming is internal with disconnects at each tongue extension location

 OPTIONAL SPARE TIRE & WHEEL 

  • ST235/80R16 LR-E (10K & 12K axles)
  • 215/75R/17.5 LR-H (16K axles)

 FRONT BOLSTER OPTIONS (mounted on extendable tongue) 

  • 60" wide 3" double C-channel bolster - available with either 12" chain adjusted stanchions or 21" lever lock stanchions (in lieu of 45" tubular bolster)
  • 95" wide 4" double C-channel bolster - available with either 12" chain adjusted stanchions or 21" lever lock stanchions (in lieu of 45" tubular bolster)
  • (4) - 30' long nylon winch strap in lieu of 15'

 HITCH, JACK & MISC. OPTIONS

  • 3" lunette eye in lieu of 2 1/2" eye
  • Quick-change adjustable/pinable lunette eye (18" of hitch adjustment)
  • Visible registration holder
  • Full width jack handle extension for full width (95") front bolster
  • Wheel chocks and wheel chock holders (7"H x 10"L x 8"W)
  • 12" chain adjusted sliding stanchions in lieu of 21" lever lock stanchions (deduct)

 CARGO BED OPTIONS

  • 12 gauge steel floor with 10" x 10" perforated sections for drainage and clean-out
  • "D" Rings

 OPTIONAL LIGHT BAR  

  • Standard BBT Light Bar:  Includes (2) oval rubber mounted sealed LED beam lights (stop turn and tail); (3) center ID marker lights and two side marker lights.  Light bar is attached to the pole with an adjustable ¼" chain and wingnut.  Standard electric cable length is 25' with 6-Way Aluminum Die Cast Connector  (longer electric cables are provided for longer capacity pole trailers

 ELECTRICAL WIRING OPTIONS

  • 7-way RV plug in lieu of standard 6-way connector
  • 7-way ICC plug in lieu of standard 6-way connector
  • Warner 6-way connector in lieu of standard 6-way connector
  • Solar charged breakaway kit in lieu of standard kit