SL
CAPACITY
11,000 lbs. Load Capacity
Approx 2,800 lbs. Curb Weight
14,000 lbs. GVWR (Calculated at 15% Tongue Weight)
DIMENSIONS
16’ Deck Length
60” Tongue Length
102” Overall Width
81” Deck Width Between Fenders
16” Deck Height
AXLES
6000# Tandem rubber torsion Axles
Electric Brakes on All Wheels
8 Bolt Hubs
(4) four – ST235/80R16 LR-E Tires
(4) four – 16” x 6” White Mod Wheel (8 Hole on 6 1/2“ Bolt Circle)
Fenders, Fabricated from 1/8” Steel Tread Plate
LOADING RAMPS
54”L x 18”W Self-Supporting / Adjustable / Removable Ramps
Vertical Slide Latch System Holds Ramps in Vertical Position
Low Loading Angle – 16” Deck Height
TONGUE HITCH & JACK
6” X 2” Tubular Upper Tongue
5” x 2” Tubular Lower Tongue
2 5/16” Ball Coupler or 2 1/2” Lunette Eye (Your Choice)
6-Position Adjustable Hitch Plate
10,000 lbs. Drop Leg Jack
3/8” Safety Chains with Safety Latch Hooks and Anchor Shackle
MAIN FRAME
7” x 4” x 3/8” Angle Frame
3” Channel Crossmembers
Stake Pockets (5 per side)
FLOORING
2” Oak Deck – Installed with 1/4” Floor Screws
Each Board Anchored Both Ends With 5/16” Carriage Bolts
12 VOLT WIRING SYSTEM
ICC & DOT Approved LED Lights
Sealed Beam Rubber Mounted Stop, Turn, Tail and Marker LED Lights
S.O. Cable Wiring Loom, Clamped on 16” Centers with Rubber Lined Clamps
Wiring Loom Terminated in Junction Boxes
Connections Soldered and Sealed with Heat Shrink Tubing
32” Pigtail w/ 6-Way Aluminum Die Cast Plug, Terminated at Junction Box
Breakaway Kit, with Sealed lead Acid Battery & Trickle Charger
PAINT
Trailer is Completely Sandblasted
Seams are Sealed with Paintable Caulk
Rust Prohibitive Two-Part Epoxy Polyamide Primer
Two-Part Acrylic Polyurethane Topcoats (Standard Colors Black and White)
All Attachments Painted before Assembly and Installed with Serviceable Fasteners
2” Red/White Reflective Tape on Both Sides of Trailer