Model

OW202-20K

Capacity

• 40,000 lbs. Load Capacity
• Approx 7,000 lbs. Curb Weight
• 47,000 lbs. GVWR (Calculated at 15% Tongue Weight)

Dimensions

• 20’ Flat Deck Length
• 5’ Beavertail, Self-Cleaning on 10 Degree Angle
• 60” Tongue Length
• 100” Overall Width
• 35 1/2” Deck Height

Axles

• 22,500# Tandem Dexter Axles
• ABS Equipped, (1) Axle
• 10 Bolt Oil Bath Hubs & Drums
• 12 1/4” x 7 1/2" “S” Cam Air Brakes on All Wheels
• Spring Brakes on Both Axles
• Hutch H9700, (3) Leaf Suspension
• (8) eight – 215/75/R17.5 LR-H Tires
• (8) eight – 17.5” x 6.75” (3) Spoke Dual Wheel
• (1) Pair - Mud Flaps

Loading Ramps

• 60”L x 18”W Self-Supporting / Adjustable / Fold Up Ramps with Spring Assist
• 10 Degree Beavertail Angle

Tongue Hitch & Jack

• 14” x 26# Wide Flange Beam (One Piece Frame & Tongue Construction)
• 3” Lunette Eye (60000 lbs Capacity)
• 6-Position Adjustable Hitch Plate (21” through 33”)
• 1/2” Galvanized Safety Chains with Safety Latch Hooks and Anchor Shackle
• Single, 2-Speed Binkley Drop Leg Jack, w/ Jack Handle Extension

Main Frame

• 14” x 26# Wide Flange Beam
• 4” Channel Crossmembers Pierced Through Main Frame on Approx 18” Centers
• 7” Channel Side Rails
• 6” Channel Headboard
• Stake Pockets (7 per side)

Flooring

• 2” Oak Deck - Installed with 1/4” Floor Screws
• Each Board Anchored Both Ends With 5/16” Carriage Bolts

Paint

• Trailer is Completely Sandblasted
• Seams are Sealed with Paintable Caulk
• Rust Prohibitive Two-Part Epoxy Polyamide Primer
• Two-Part Acrylic Polyurethane Topcoats (Standard Colors Black and White)
• All Attachments Painted before Assembly and Installed with Serviceable Fasteners
• 2” Red/White Reflective Tape on Both Sides of Trailer

12 Volt Wiring System

• ICC & DOT Approved Lights
• Sealed Beam Rubber Mounted Stop, Turn, Tail and Marker Lights
• Steel Mud Guards on Beavertail to Protect Lights and Wiring
• S.O. Cable Wiring Loom, Clamped on 16” Centers with Rubber Lined Clamps
• Wiring Loom Terminated in Junction Boxes
• Connections Soldered and Sealed with Heat Shrink Tubing
• 32” Pigtail w/ 6-Way Aluminum Die Cast Plug, Terminated at Junction Box
• Breakaway Kit with Sealed Lead Acid Battery and Trickle Charger