Model

OWBC182-7K

Capacity

• 12,000 lbs. Load Capacity
• Approx 4,000 lbs. Curb Weight
• 16,000 lbs. GVWR (Calculated at 15% Tongue Weight)

Dimensions

• 16’ Flat Deck Length
• 5’ Beavertail, Self-Cleaning on 10 Degree Angle
• 60” Tongue Length
• 100” Overall Width
• 33 1/2” Deck Height

Axles

• 7000# Tandem Dexter Axles 8 Bolt Hubs 12” x 2” Electric Brakes on All Wheels
• Slipper Spring Suspension
• (4) four - ST235/80R16 LR-E Tires
• (4) four - 16” x 6” Single White Spoke Wheels (8 Hole on 6 1/2“ Bolt Circle)
• (1) Pair - Mud Flaps

Loading Ramps

• 66”L x 18”W Self-Supporting / Adjustable / Fold Up Ramps with Spring Assist
• 10 Degree Beavertail Angle

Tongue Hitch & Jack

• 8” x 11.5# C-Channel
• 2 5/16” Ball Coupler or 2 1/2” Lunette Eye (Your Choice)
• 6-Position Adjustable Hitch Plate (21” through 33”)
• 3/8” Galvanized Safety Chains with Safety Latch Hooks and Anchor Shackle
• Single, 12000 lb. Binkley Model 48000 Drop Leg Jack

Main Frame

• 8” x 11.5# C-Channel
• 3” Channel Crossmembers on Approx 18” Centers
• 6” Channel Side Rails
• 8” Channel Headboard (3 1/2" Above Deck)
• Stake Pockets (7 per side)

Flooring

• 2” Oak Deck - Installed with 1/4” Floor Screws
• Each Board Anchored Both Ends With 5/16” Carriage Bolts

Paint

• Trailer is Completely Sandblasted
• Seams are Sealed with Paintable Caulk
• Rust Prohibitive Two-Part Epoxy Polyamide Primer
• Two-Part Acrylic Polyurethane Topcoats (Standard Colors Black and White)
• All Attachments Painted before Assembly and Installed with Serviceable Fasteners
• 2” Red/White Reflective Tape on Both Sides of Trailer

12 Volt Wiring System

• ICC & DOT Approved Lights
• Sealed Beam Rubber Mounted Stop, Turn, Tail and Marker Lights
• S.O. Cable Wiring Loom, Clamped on 16” Centers with Rubber Lined Clamps
• Wiring Loom Terminated in Junction Boxes
• Connections Soldered and Sealed with Heat Shrink Tubing
• 32” Pigtail w/ 6-Way Aluminum Die Cast Plug, Terminated at Junction Box
• Breakaway Kit with Sealed Lead Acid Battery and Trickle Charger