Model

PTF122-6KXL

Capacity

• 13,800 lbs. GVWR - Calculated at 15% Weight Transfer to Tow Vehicle
• 10,200 lbs. Load Capacity

Dimensions

• Length Adjustments: 24’ / 31’ / 38’
• Cargo Bed: 130”L x 90”W x 10”H
• Overall Width: 93”
• Bolster Height: 48”

Axles

• 6000 lbs. Tandem Dexter Straight Axles - (Optional Axles: 7K & 8K)
• 12” x 2” Electric Brakes All Wheels
• 3500 lbs. 5 Leaf Slipper Springs,
• Reinforced Spring Hangers with 3” Structural C-Channel Crossmember
• (4) four - LT235/85R16 LR-E Tires, Capacity 3,042 lbs. each, Single Wheel Application
• (4) four - 16” x 6” Single Wheels (8 Hole on 6 1/2" Bolt Circle)
• (1) Pair - Mud Flaps

Pole Bolsters

• Front Bolster: 45”W Fixed (Mounted on Extendible Tongue)
• Center Bolster: 93”W Fixed 3” Double C-Channel Construction with 9” Stanchions
• Rear Bolster: 93”W Fixed 3” Double C-Channel Construction with 9” Stanchions
• Stanchions: (4) four – 9” Chain Adjusted, Sliding & Removable
• (4) four - Heavy Duty Ratchet Type Winch Binders with Breaker Bar
• (4) four - 15’ L x 4” W x 12000 lbs. Nylon Straps

Reel Racks

• Idler Rack Package
  • Complete Two Reel Assembly
  • (2) Removable 2 7/8” Reel Bars with Crossarm and (1) Locking Collar
  • Bronze Bushings with Retainer Cap, Pull Pin and Spring Clip
  • Removable Tubular Construction Frame with (4) Lifting Eyes
  • (4) Receiver Pockets on Trailer, Pull Pins and Spring Clip
  • Maximum Reel Size each 72”D x 4,500 lbs x Width 48” to 60”
• 12” Tension Brake Package
  • Complete Two Reel Assembly
  • (2) 12” (Medium Duty) Tension Brakes w/ 12”D x 5/8” Solid Bronze Disc
  • Cast Steel Caliper with Tension Adjust Handle
  • (2) Removable 2 7/8” Reel Bars with Crossarm and (1) Locking Collar
  • Bronze Bushings with Retainer Cap, Pull Pin and Spring Clip
  • Removable Tubular Construction Frame with (4) Lifting Eyes
  • (4) Receiver Pockets on Trailer, Pull Pins and Spring Clip
  • Maximum Reel Size each 72”D x 4,500 lbs x Width 48” to 60”
• 16” Tension Brake Package
  • Complete Two Reel Assembly
  • (2) 16” Tension Brakes w/ 16”D x 3/4” Solid Bronze Disc
  • Cast Steel Caliper with Tension Adjust Handle
  • (2) Removable 2 7/8” Reel Bars with Crossarm and (1) Locking Collar
  • Bronze Bushings with Retainer Cap, Pull Pin and Spring Clip
  • Removable Tubular Construction Frame with (4) Lifting Eyes
  • (4) Receiver Pockets on Trailer, Pull Pins and Spring Clip
  • Maximum Reel Size each 72”D x 4,500 lbs x Width 48” to 60

Tongue & Hitch

• 7” x 3” x 1/4" Wall Extendable Tongue with Lubricated Steel Wear Pads
• 6-Position Adjustable Hitch Plate
• 2 1/2" Lunette Eye, 35000 lbs. Capacity
• 3/8” x 36”L Galvanized Safety Chains with Safety Hooks and Anchor Shackles

A-Frame & Jack

• 7” Structural C-Channel Steel A-Frame
• Fixed Binkley, Model 48000 Drop Leg Jack, 12,000 lb. Static Load Capacity

Main Frame

• 5” x 3” Tubular Steel Main Frame
• 8” x 4” Receiver Tube
• 8” x 3 “ Tubular Steel Crossmembers Under Center and Rear Bolsters
• 3” Structural C-Channel Crossmembers on 16” Centers Under Cargo Bed Floor

Cargo Bed

• Interior Dimensions: 130”L x 90”W x 10”H
• Floor: 1/8” Smooth Steel Construction
• Side Gates: (4) four Drop Down with Offset Hinges so Debris is Easily Cleared
• (4) four - 5/8” D-Rings, 9000 lbs. Capacity each, Mounted (1) one each Corner Post

Paint

• Trailer is Completely Sandblasted
• Seams are Sealed with Paintable Caulk
• Rust Prohibitive Two-Part Epoxy Polyamide Primer
• Two-Part Acrylic Polyurethane Topcoats (Standard Colors Black and White)
• All Attachments Painted before Assembly and Installed with Serviceable Fasteners
• 2” Red/White Reflective Tape on Both Sides of Trailer

12 Volt Wiring System

• ICC & DOT Approved Lights
• Sealed Beam Rubber Mounted Stop, Turn, Tail and Marker Lights
• S.O. Cable Wiring Loom, Clamped on 16” Centers with Rubber Lined Clamps
• Wiring Loom Terminated in Junction Boxes
• Connections Soldered and Sealed with Heat Shrink Tubing
• 32” Pigtail w/ 6-Way Aluminum Die Cast Plug, Terminated at Junction Box
• Breakaway Kit with Sealed Lead Acid Battery and Trickle Charger