Model

SLT141-7K-E

Capacity

• 6,000 lbs. Load Capacity
• Approx 2,200 lbs. Curb Weight
• 8,200 lbs. GVWR (Calculated at 15% Tongue Weight)

Dimensions

• 14’ Tilt Deck Length with 12” Entrance Ramp
• 60” Tongue Length
• 102” Overall Width
• 81” Deck Width Between Fenders
• 16” Deck Height

Axles

• 7000# Single Dexter Torflex Axle
• 12” x 2” Electric Brakes
• 8 Bolt Hubs
• (2) two - ST235/80R16 LR-E Tires
• (2) two - 16” x 6” White Mod Wheels (8 Hole on 6 ½” Bolt Circle)
• Fenders Fabricated From 1/8” Steel Tread Plate

Equipment Loading

• Tilt Deck with Low Loading Angle
• Spring Loaded Tilt Deck Latching System
• 12” Tapered Entrance Ramp

A-Frame Tongue & Hitch

• 6” X 2” Tubular Upper Tongue
• 5” x 2” Tubular Lower Tongue
• 2 5/16” Ball Coupler or 2 1/2” Lunette Eye (Your Choice)
• 6-Position Adjustable Hitch Plate
• 7000 lbs. Drop Leg Jack
• 3/8” Galvanized Safety Chains with Safety Latch Hooks and Anchor Shackle
• 1 3/16” Cold Rolled Tilt Hinge Pins

Main Frame

• 7” x 4” x 3/8” Angle Frame
• 3” Channel Crossmembers
• Stake Pockets (4 Per Side)

Flooring

• 2” Oak Deck - Installed with 1/4” Floor Screws
• Each Board Anchored Both Ends With 5/16” Carriage Bolts

Paint

• Trailer is Completely Sandblasted
• Seams are Sealed with Paintable Caulk
• Rust Prohibitive Two-Part Epoxy Polyamide Primer
• Two-Part Acrylic Polyurethane Topcoats (Standard Colors Black and White)
• All Attachments Painted before Assembly and Installed with Serviceable Fasteners
• 2” Red/White Reflective Tape on Both Sides of Trailer

12 Volt Wiring System

• ICC & DOT Approved Lights
• Sealed Beam Rubber Mounted Stop, Turn, Tail and Marker Lights
• S.O. Cable Wiring Loom, Clamped on 16” Centers with Rubber Lined Clamps
• Wiring Loom Terminated in Junction Boxes
• Connections Soldered and Sealed with Heat Shrink Tubing
• 32” Pigtail w/ 6-Way Aluminum Die Cast Plug, Terminated at Junction Box
• Breakaway Kit with Sealed Lead Acid Battery and Trickle Charger