3RT

Reel Trailer

Ask about our self-contained power units and guide-system rollers (see photos).

CAPACITY

• 14,000 lbs. GVWR - Calculated at 15% Weight Transfer to Tow Vehicle
• 10,000 lbs. Load Capacity

DIMENSIONS

• Overall Length: 27’
• A-Frame: 5’
• Cargo Bed: 22’6”L x 72”W x 15”H
• Overall Width: 101”
• Reel Size: (3) three x 84”D x 60”W x 3” Center Hole

AXLES

• 6000 lbs. Tandem Dexter Torflex Axles - (Optional Axles: 7000 lb. & 8000 lb.)
• 12” x 2” Electric Brakes on All Wheels
• (4) four - ST235/80R16 LR-E Tires, Capacity 3,042 lbs. each, Single Wheel Application
• (4) four - 16” x 6” Single Wheels (8 Hole on 6 1/2" Bolt Circle)
• (1) Pair - Mud Flaps

REEL RACKS

• (3) three - Fixed w/ Heavy Duty Bronze Bearings, Retainer Cap, Pull Pin & Spring Clip
• (3) three - 2 7/8” Reel Bar with Crossarm and (1) Locking Collar

TONGUE, HITCH & JACK

• 5” x 3” Tubular Steel A-Frame
• 6-Position Adjustable Hitch Plate (14” through 27”)
• 2 1/2" Lunette Eye, 35000 lbs. Capacity
• 3/8” x 36”L Galvanized Safety Chains with Safety Hooks and Anchor Shackles
• Fixed Binkley, Model 48000 Drop Leg Jack, 12,000 lb. Static Load Capacity

MAIN FRAME

• 5” x 3” Tubular Steel Main Frame
• 5” x 3 “ Tubular Steel Crossmembers at Front of Cargo Bed
• 6” x 3 “ Tubular Steel Crossmembers at Rear of Cargo Bed

CARGO BED

• 12 Gauge Smooth Steel Floor
• 3” C-Channel & 3” Angle Crossmembers on 24” Centers
• Sides - 12 Gauge Steel with 3”x3” Tubular Steel Top Rail & 5”x3” Lower Rail
• 12”H x 2”W Vertical Guide Slots for Drop-in 2”W Lumber for Removable Tailgate

FENDERS

• Fabricated 1/8” Steel Diamond Tread Plate Fenders
• Integrated Construction with Cat Walks

TOOL BOX

• Tool Box Dimensions: 14”H x 13”D x 78” Contoured to A-Frame
• Fabricated 1/8” Smooth Steel Intergraded Construction
• Lift-Up Lid with Security Hasp for Padlock

12 VOLT WIRING SYSTEM

• ICC & DOT Approved Lights
• Sealed Beam Rubber Mounted Stop, Turn, Tail and Marker Lights
• S.O. Cable Wiring Loom, Clamped on 16” Centers with Rubber Lined Clamps
• Wiring Loom Terminated in Junction Boxes
• Connections Soldered and Sealed with Heat Shrink Tubing
• 32” Pigtail w/ 6-Way Aluminum Die Cast Plug, Terminated at Junction Box
• Breakaway Kit with Sealed Lead Acid Battery & Trickle Charger

PAINT

• Trailer is Completely Sandblasted
• Seams are Sealed with Paintable Caulk
• Rust Prohibitive Two-Part Epoxy Polyamide Primer
• Two-Part Acrylic Polyurethane Topcoats (Standard Colors White and Safety Yellow)
• All Attachments Painted before Assembly and Installed with Serviceable Fasteners