TRT

Turret Cable Reel Trailer

CAPACITY

• 16,450 lb. GVWR-Calculated at 15% Weight Transfer to Tow Vehicles
• Approx. 12,450 lb. Load Capacity

DIMENSIONS

• Overall Length: 18'
• A-Frame: 6'
• Cargo Bed: 12'L x 72"W Max
• Overall Width: 101" Max
• Reel Size: (2) Two 72"D x 54"W x 3" Center Hole

AXLES

• 7,000 lb. Tandem Torflex Dexter Axles (better ride and less maintenance than leaf
• spring)
• 12" x 2" Electric Brakes on All Wheels
• (4) Four - 235/80R16 LR-E Tires
• (4) Four - 16" x 6" Single Wheels (8 Holes on 6 1/2" Bolt Circle)
• (1) Pair Mud Flaps

REEL RACKS

• (2) Two -Revolving Turret Reel Assemblies Lockable Every 15 Degrees with Heavy Duty Cam Followers (4) Per Turret Assembly, each Cam Follower Rated at 4,840 lbs cap ea.
• (2) Two - 2 7/8" Reel Bars with Crossarm and (1) One Locking Collar, Rotating in Heavy Duty Bronze Bearings

TONGUE, HITCH & JACKS

• 12" x 16 lb. Wide Flange Beam
• 6-Position Adjustable Hitch Plate (14" through 27")
• 2 1/2" Lunette Eye, 35K Capacity
• 3/8" x 36"L Galvanized Safety Chains 5,400 lb Working Load, 21,000 lb Breaking
• Load with Safety Hooks and Anchor Shackles For Easy Replacement of Damaged
• Safety Chain
• (1) One Fixed Heavy Duty Binkley, Model 48000 Dropleg Jack, 12.000 lb Static
• Load Capacity on Tongue
• (2) Two Pinnable Drop Leg Jacks Both Sides Located at Rear of Trailer
• Stabilizing
• Registration Holder with Clear Lexan Glass and Gasket

MAIN FRAME

• 12" x 16 lb Wide Flange Beam Main Frame
• 8" C-Channel Crossmembers at Turret Locations
• 3" C-Channel Crossmembers on approx. 16" Centers Throughout

CARGO BED

• Oak or Steel Deck

CATWALK

• 1/8" Steel Diamond Tread, Mounted on 4" x 2" Tubular Perimeter Frame
• Full Length of Cargo Bed, Fore and Aft of Fenders

FENDERS

• Fabricated 1/8" Steel Diamond Tread Plate Fenders
• Integrated Constructions with Catwalk
• Conspicuity Tape, Both Sides, Rear and Tongue, Meets DOT and NHTSA Standards

12 VOLT WIRING SYSTEM

• ICC & DOT Approved Lights
• Sealed Beam Rubber Mounted Stop, Turn, Tail & Marker Lights
• S.O. Cable Wiring Loom, Clamped on 16" Centers with Rubber Lined Clamps
• Wiring Loom Terminated in Junction Boxes
• Connections Soldered & Sealed with Heat Shrink Tubing
• 32" Pigtail w/ Plug***TBD***, Terminated at Junction Box
• Breakaway Kit with AGM (Absorbed Glass Mat Battery & Trickle Charger), Even if Battery Casing is Damaged, It will not Leak and Continue to Function

PAINT

• Trailer is Completely Sandblasted
• Seams are Sealed with Paintable Caulk
• Rust Prohibitive Two-Part Epoxy Polyamide Primer
• Two-Part Acrylic Polyurethane Topcoats - WHITE, RED, BLACK and SAFETY YELLOW Std
• All Attachments Painted before Assembly & Installed with Serviceable Fasteners