PT122XL

Pole Trailer

CAPACITY

• 13,500 lbs. GVWR - Calculated at 15% Weight Transfer to Tow Vehicle
• 10,200 lbs. Load Capacity

DIMENSIONS

• Length Adjustments: 24’ / 31’ / 38’
• Cargo Bed: 12’L x 64”W x 15”H
• Overall Width: 86”
• Bolster Height: 42” (45” with Optional Removable Bolsters)

AXLES

• 6000 lbs. Tandem Dexter Straight Axles - (Optional Axles: 7K & 8K)
• 12” x 2” Electric Brakes on All Wheels
• Torflex Suspension
• (4) four - ST235/80R16 LR-E Tires, Capacity 3,042 lbs. each, Single Wheel Application
• (4) four - 16” x 6” Single Wheels (8 Hole on 6 1/2" Bolt Circle)
• (1) Pair - Mud Flaps
• (1) Pair - Fender Mounted Wheel Chock Holders (Wheel Chocks Not Included)

POLE BOLSTERS

• Front Bolster: 45”W Fixed (Mounted on Extendable Tongue)
• Center Bolster: 64”W with Pole Stops (Built into Front Wall of Cargo Bed)
• Rear Bolster: 64” W with Pole Stops (Built into Tailgate - 2”x2” Tubular Construction)
• (4) four - Heavy Duty Ratchet Type Winch Binders with Breaker Bar
• (4) four - 15’ L x 4” W x 12000 lbs. Nylon Straps

POCKETS FOR REMOVABLE REEL RACKS

• (1) pair - 3” Receiver Tubes, Mounted inside Cargo Bed Sidewalls

TONGUE & HITCH

• 8” x 4” x 1/4" Wall Extendable Tongue with Lubricated Steel Wear Pads
• 6-Position Adjustable Hitch Plate
• 2 1/2" Lunette Eye, 35,000 lbs. Capacity
• 3/8” x 36”L Galvanized Safety Chains with Safety Hooks and Anchor Shackles

* Roller to aide in tongue extension

A-FRAME & JACK

• 6” x 2” Tubular Steel A-Frame
• Fixed Binkley, Model 48000 Drop Leg Jack, 12,000 lb. Static Load Capacity

MAIN FRAME

• 6” x 3” Tubular Steel Main Frame
• 10” x 6” Receiver Tube
• 7” x 3“ Tubular Steel Crossmembers Under Center and Rear Bolsters
• 3” Structural C-Channel Crossmembers on 14 1/2” Centers Under Cargo Bed Floor

CARGO BED

• Interior Dimensions: 142”L x 64”W x 15”H with Reinforced Fold Down Tailgate
• Floor: 1/8” Smooth Steel Construction
• Sidewalls: 12 Gauge Formed in Brake for Added Strength
• Tailgate: Tubular Construction, w/ Offset Hinges so Debris is Easily Cleared
• (4) four - 5/8” D-Rings, 19,000 lbs. Capacity each, Floor Mounted (1) one each Corner

FENDERS & CATWALK

• Fabricated 1/8” Steel Diamond Tread Plate Fender Construction
• (4) four - Roll-Off Fender Guards, Prevents Damage to Fenders when “Wrecking”

TOOL BOX

• Tool Box Dimensions: 14”H x 24”D x 64”W
• Fabricated from 1/8” Smooth Steel Integrated Construction
• (2) Side Entry Doors Key Locked with Twist Latches
• Weather Tight Rubber Gaskets

12 VOLT WIRING SYSTEM

• ICC & DOT Approved Lights
• Sealed Beam Rubber Mounted Stop, Turn, Tail and Marker Lights
• S.O. Cable Wiring Loom, Clamped on 16” Centers with Rubber Lined Clamps
• Wiring Loom Terminated in Junction Boxes
• Connections Soldered and Sealed with Heat Shrink Tubing
• Internal Wiring In Tongue Extension, Receptacle At Each Pin Location
• 36” Pigtail w/ 6-Way Aluminum Die Cast Plug, Terminated at Junction Box
• 6-Way Aluminum Die Cast Plug (Truck Side) in Rear Butt Tube for Light Bar Hook-Up
• Breakaway Kit with Sealed Lead Acid Battery & Trickle Charger

PAINT

• Trailer is Completely Sandblasted
• Seams are Sealed with Paintable Caulk
• Rust Prohibitive Two-Part Epoxy Polyamide Primer
• Two-Part Acrylic Polyurethane Topcoats (Standard Colors White and Safety Yellow)
• All Attachments Painted before Assembly and Installed with Serviceable Fasteners