PTB112
Pole Trailer
CAPACITY
• 23,500 lbs. GVWR - Calculated at 15% Weight Transfer to Tow Vehicle
• 20,000 lbs. Load Capacity
DIMENSIONS
• Length Adjustments: 26’ / 33’ / 40’
• Cargo Bed Solid steel with expanded metal inserts
• Overall Width: 95”
• Bolster Height: 42”
AXLES
• 10,000 lbs. Tandem Dexter Straight Axles - (Optional Axles 10K HD, 12K & 15K)
• Oil Bath Hubs, 8 Studs
• 12 1/4” x 3 3/8” Electric Brakes All Wheels
• 4500 lbs. 6 Leaf Slipper Springs
• Adjustable Spring Pads for Wheel Alignment
• Reinforced Spring Hangers with 3” Structural C-Channel Crossmenber
• (8) eight - ST235/80R16 LR-E Tires, Capacity 2,778 lbs. each, Dual Wheel Application
• (8) eight - 16” x 6” Wheels (8 Hole on 6 1/2" Bolt Circle)
• Pair - Mud Flaps
POLE BOLSTERS
• Front Bolster: 60”W Fixed 5” Double C-Channel Construction with 21” Stanchions
• Center Bolster: 95”W Fixed 5” Double C-Channel Construction with 21” Stanchions
• Rear Bolster: 95”W Fixed 5” Double C-Channel Construction with 21” Stanchions
• Stanchions: (4) four - 21” Lever Lock, Sliding & Removable
• (4) four - Heavy Duty Ratchet Type Winch Binders with Breaker Bar
• (4) four - 15’ L x 4” W x 12000 lbs. Nylon Straps
TONGUE & HITCH
• 8” x 4” x 1/4" Wall Extendable Tongue with Lubricated Steel Wear Pads
• 6-Position Adjustable Hitch Plate
• 2 1/2" Lunette Eye, 35000 lbs. Capacity
• 3/8” x 36”L Galvanized Safety Chains with Safety Hook and Anchor Shackle
Roller to aide in tongue extension
A-FRAME & JACK
• 7” Structural C-Channel A-Frame
• Fixed Binkley, Model 48000 Drop Leg Jack, 12,000 lb. Static Load Capacity
MAIN FRAME
• 7” x 4” Tubular Steel Frame
• 10” x 6” Receiver Tube
• 7” x 4 “ Tubular Steel Crossmembers Under Rear Bolster
• 3” Structural C-Channel Crossmembers
FENDERS
• Fabricated 1/8” Steel Diamond Tread Plate Fender Construction
• Reinforced with 3” Structural C-Channel at Front and Rear of Fender
12 VOLT WIRING SYSTEM
• ICC & DOT Approved Lights
• Sealed Beam Rubber Mounted Stop, Turn, Tail and Marker Lights
• S.O. Cable Wiring Loom, Clamped on 16” Centers with Rubber Lined Clamps
• Wiring Loom Terminated in Junction Boxes
• Connections Soldered and Sealed with Heat Shrink Tubing
• Internal Wiring in Tongue Extension, Receptacle at Each Pin Location
• 32” Pigtail w/ 6-Way Aluminum Die Cast Plug, Terminated at Junction Box
• 6-Way Aluminum Die Cast Plug (Truck Side) in Rear Butt Tube for Light Bar Hook-Up
• Breakaway Kit with Sealed Lead Acid Battery & Trickle Charger
PAINT
• Trailer is Completely Sandblasted
• Seams are Sealed with Paintable Caulk
• Rust Prohibitive Two-Part Epoxy Polyamide Primer
• Two-Part Acrylic Polyurethane Topcoats (Standard Colors White and Safety Yellow)
• All Attachments Painted before Assembly and Installed with Serviceable Fasteners
Options
AXLES WITH ELECTRIC BRAKES OPTIONS
- 10000 lbs. HD - Payload: 20,000 lbs. GVWR 23,500 lbs.
8 Stud Oil Bath Hubs
12 1/4" x 4" Electric Brakes ST235/80R16 LR-E Tires, Capacity 2,778 lbs. each
8 Hole Dual Wheels - 12000 lbs. - Payload: 24,000 lbs. GVWR 28,000 lbs.
8 Stud Oil Bath Hubs
12 1/4" x 5" Electric Brakes
ST235/80R16 LR-E Tires, (14 Ply) Capacity 3,100 lbs. each
8 Hole Dual Wheels - 15000 lbs. - Payload: 31,000 lbs. GVWR 35,000 lbs.
10 Stud Oil Bath Hubs
12 1/4" x 5" Electric Brakes
215/75R/17.5 LR-H Tires, Capacity 4,540 lbs. each
8 Hole Dual Wheels
AXLES WITH ABS AIR BRAKES OPTIONS
- 10000 lbs. HD w/ ABS
8 Stud Oil Bath Hubs
12 1/4" x 4" Spring Brakes, Auto Slack Adjusters
ST235/80R16 LR-E Tires, Capacity 2,778 lbs. each
8 Hole Dual Wheels - 12000 lbs. w/ ABS
8 Stud Oil Bath Hubs
12 1/4" x 5" Spring Brakes, Auto Slack Adjusters
ST235/80R16 LR-E Tires, (14 Ply) Capacity 3,100 lbs. each
8 Hole Dual Wheels - 15000 lbs. w/ ABS
10 Stud Oil Bath Hubs
12 1/4" x 5" Spring Brakes, Auto Slack Adjusters
215/75R/17.5 LR-H Tires, Capacity 4,540 lbs. each
10 Hole Dual Wheels
OPTIONAL SPARE TIRE & WHEELS
- ST235/80R16 LR-E (10 & 12K Axle)
- 215/75R/17.5 LR-H (15K Axle)
- Wheel Chock Holders, with 7"H x 10"L x 8"W Rubber Wheel Chocks
BOLSTER OPTIONS
- 64"W Tubular Front Bolster on Extendable Tongue,
Pole Stops, Winch Binder and Nylon Strap in Lieu of Standard Front Bolster - U-Type Single Pole Cradle on Extendable Tongue,
Winch Binder and Nylon Strap in Lieu of Standard Front Bolster - 60"W (45" ID) 3" Double C-Channel Front Bolster on Extendable Tongue, Winch Binder and Nylon Strap in Lieu of Standard Front Bolster
with 9" Chain Adjusted Stanchions
with 21" Lever Lock Stanchions - (4) four - 30' L Nylon Winch Strap in Lieu of 15'
- (4) four - 9" Chain Adjusted Stanchions,
Installed on Center & Rear Bolster
In Lieu of 21" Lever Lock Stanchions
HITCH & JACK OPTIONS
- 3" Lunette Eye
- Visible Registration Holder
- Jack Handle Extension
Add to One Side
Add to Both Sides (Requires Store-Away Handle)
CARGO BED OPTIONS
- D-Rings
- Tool Box 15" Long x 12 1/4" Wide x 10" Deep
Mounted in Front of Fender
WIRING & LIGHT BAR OPTIONS
- Light Bar
(2) Rubber Mounted Sealed Beam Lights (Stop Turn and Tail)
36"L x 4" x 4" Tubular Steel Body
Chain Adjusted Mounting Base
25' of Cable with 6-Way Aluminum Die Cast Connector - Warner 6-Way Connector (Trailer End)
in Lieu of Standard 6-Way Connector - Solar Charged Breakaway Kit
In Lieu of Standard Kit