PTB81

Pole Trailer



CAPACITY

• 11,700 lbs. GVWR - Calculated at 15% Weight Transfer to Tow Vehicle
• 8,700 lbs. Load Capacity

DIMENSIONS

• Length Adjustments: 20’ / 25’ / 30’
• Cargo Bed Solid steel floor with expanded metal inserts
• Overall Width: 95”
• Bolster Height: 42”

AXLES

• 10,000 lbs. Single Dexter Straight Axle - (Optional Axles 10KHD, 12K & 15K)
• Oil Bath Hubs, 8 Studs
• 12 1/4” x 3 3/8” Electric Brakes All Wheels
• 4500 lbs. 6 Leaf Slipper Springs
• Adjustable Spring Pads for Wheel Alignment
• Reinforced Spring Hangers with 3” Structural C-Channel Crossmenber
• (4) four - ST235/80R16 LR-E Tires, Capacity 2,778 lbs. each, Dual Wheel Application
• (4) four - 16” x 6” Wheels (8 Hole on 6 1/2" Bolt Circle)
• Pair - Mud Flaps

POLE BOLSTERS

• Front Bolster: 45”W Fixed (Mounted on Extendable Tongue)
• Center Bolster: 95”W Fixed 5” Double C-Channel Construction with 21” Stanchions
• Rear Bolster: 95”W Fixed 5” Double C-Channel Construction with 21” Stanchions
• Stanchions: (4) four - 21” Lever Lock, Sliding & Removable
• (4) four - Heavy Duty Ratchet Type Winch Binders with Breaker Bar
• (4) four - 15’ L x 4” W x 12000 lbs. Nylon Straps

TONGUE & HITCH

• 6” x 4” x 1/4" Wall Extendable Tongue with Lubricated Steel Wear Pads
• 6-Position Adjustable Hitch Plate
• 2 1/2" Lunette Eye, 35000 lbs. Capacity
• 3/8” x 36”L Galvanized Safety Chains with Safety Hook and Anchor Shackle

* Roller to aide in tongue extension

A-FRAME & JACK

• 7” Structural C-Channel A-Frame
• Fixed Binkley, Model 48000 Drop Leg Jack, 12,000 lb. Static Load Capacity

MAIN FRAME

• 7” x 4” Tubular Steel Frame
• 8” x 6” Receiver Tube
• 7” x 4 “ Tubular Steel Crossmembers Under Rear Bolster
• 3” Structural C-Channel Crossmembers

FENDERS

• Fabricated 1/8” Steel Diamond Tread Plate Fender Construction
• Reinforced with 3” Structural C-Channel at Front and Rear of Fender

12 VOLT WIRING SYSTEM

• ICC & DOT Approved Lights
• Sealed Beam Rubber Mounted Stop, Turn, Tail and Marker Lights
• S.O. Cable Wiring Loom, Clamped on 16” Centers with Rubber Lined Clamps
• Wiring Loom Terminated in Junction Boxes
• Connections Soldered and Sealed with Heat Shrink Tubing
• Internal Wiring In Tongue Extension, Rectacle At Each Pin Location
• 32” Pigtail w/ 6-Way Aluminum Die Cast Plug, Terminated at Junction Box
• 6-Way Aluminum Die Cast Plug (Truck Side) in Rear Butt Tube for Light Bar Hook-Up
• Breakaway Kit with Sealed lead Acid Battery & Trickle Charger

PAINT

• Trailer is Completely Sandblasted
• Seams are Sealed with Paintable Caulk
• Rust Prohibitive Two-Part Epoxy Polyamide Primer
• Two-Part Acrylic Polyurethane Topcoats (Standard Colors White and Safety Yellow)
• All Attachments Painted before Assembly and Installed with Serviceable Fasteners
Request a Quote Video Blog Brakes and RetrieversBrakes and Retreivers

Options

AXLES WITH ELECTRIC BRAKES OPTIONS

  • 10000 lbs. GD - Payload: 8,700 lbs.  GVWR 11,700 lbs.
    8 Stud Oil Bath Hubs
    12 1/4" x 3 3/8" Electric Brakes
    (4) four - LT235/85R16 LR-E Tires, Capacity 2,778 lbs. each
    (4) four - 8 Hole Dual Wheels

  • 10000 lbs. HD - Payload: 8,700 lbs.  GVWR 11,700 lbs.
    8 Stud Oil Bath Hubs
    12 1/4" x 4" Electric Brakes
    (4) four - LT235/85R16 LR-E Tires, Capacity 2,778 lbs. each
    (4) four - 8 Hole Dual Wheels

  • 12000 lbs. - Payload: 11,000 lbs.  GVWR 14,100 lbs.
    8 Stud Oil Bath Hubs
    12 1/4" x 5" Electric Brakes
    (4) four - ST235/80R16 LR-E Tires, (14 Ply) Capacity 3,100 lbs. each
    (4) four - 8 Hole Dual Wheels

  • 15000 lbs. - Payload: 14,000 lbs.  GVWR 17,500 lbs.
    10 Stud Oil Bath Hubs
    12 1/4" x 5" Electric Brakes
    (4) four - 215/75R/17.5 LR-H Tires, Capacity 4,540 lbs. each
    (4) four - 10 Hole Dual Wheels

AXLES WITH ABS AIR BRAKES OPTIONS

  • 10000 lbs. HD w/ ABS - Payload: 8,700 lbs.  GVWR 11,700 lbs.
    8 Stud Oil Bath Hubs
    12 1/4" x 4" Spring Brakes, Auto Slack Adjusters
    (4) four - LT235/85R16 LR-E Tires, Capacity 2,778 lbs. each
    (4) four - 8 Hole Dual Wheel

  • 12000 lbs. w/ ABS - Payload: 11,000 lbs.  GVWR 14,100 lbs.
    8 Stud Oil Bath Hubs
    12 1/4" x 5" Spring Brakes, Auto Slack Adjusters
    (4) four - ST235/80R16 LR-E Tires, (14 Ply) Capacity 3,100 lbs. each
    (4) four - 8 Hole Dual Wheels

  • 15000 lbs. w/ ABS - Payload: 14,000 lbs.  GVWR 17,500 lbs.
    10 Stud Oil Bath Hubs
    12 1/4" x 5" Spring Brakes, Auto Slack Adjusters
    (4) four - 215/75R/17.5 LR-H Tires, Capacity 4,540 lbs. each
    (4) four - 10 Hole Dual Wheels

OPTIONAL SPARE TIRE & WHEELS

  • ST235/80R16 LR-E    (10 & 12K Axle)
  • 215/75R/17.5 LR-H     (15K Axle)
  • Wheel Chock Holders, with 7"H x 10"L x 8"W Rubber Wheel Chocks

BOLSTER OPTIONS

  • 64"W Tubular Front Bolster on Extendable Tongue,
    Pole Stops, Winch Binder and Nylon Strap in Lieu of Standard Front Bolster
  • U-Type Single Pole Cradle on Extendable Tongue,
    Winch Binder and Nylon Strap in Lieu of Standard Front Bolster
  • 60"W (45" ID) 3" Double C-Channel Front Bolster on Extendable Tongue,
    Winch Binder and Nylon Strap in Lieu of Standard Front Bolster
    with 9" Chain Adjusted Stanchions
    with 21" Lever Lock Stanchions
  • (4) four - 30' L Nylon Winch Strap in Lieu of 15'
  • (4) four - 9" Chain Adjusted Stanchions,
    Installed on Center & Rear Bolster
    In Lieu of 21" Lever Lock Stanchions

HITCH & JACK OPTIONS

  • 3" Lunette Eye
  • Visible Registration Holder
  • Jack Handle Extension:
    Add to One Side
    Add to Both Sides (Requires Store-Away Handle)

CARGO BED OPTIONS

 

  • D-Rings
  • Tool Box 15" Long x 12 1/4" Wide x 10" Deep
    Mounted in Front of Fender

WIRING & LIGHT BAR OPTIONS

  • Light Bar
    (2) Rubber Mounted Sealed Beam Lights (Stop Turn and Tail)
    36"L x 4" x 4" Tubular Steel Body
    Chain Adjusted Mounting Base
    25' of Cable with 6-Way Aluminum Die Cast Connector
  • Warner 6-Way Connector (Trailer End)
    in Lieu of Standard 6-Way Connector
  • Solar Charged Breakaway Kit
    In Lieu of Standard Kit