PTF
Pole Trailer
CAPACITY
• 13,800 lbs. GVWR - Calculated at 15% Weight Transfer to Tow Vehicle
• 10,200 lbs. Load Capacity
DIMENSIONS
• Length Adjustments: 24’ / 31’ / 38’
• Cargo Bed: 130”L x 90”W x 10”H
• Overall Width: 93”
• Bolster Height: 48”
AXLES
• 6000 lbs. Tandem Dexter Straight Axles - (Optional Axles: 7K & 8K)
• 12” x 2” Electric Brakes All Wheels
• 3500 lbs. 5 Leaf Slipper Springs,
• Reinforced Spring Hangers with 3” Structural C-Channel Crossmenber
• (4) four - ST235/80R16 LR-E Tires, Capacity 3,042 lbs. each, Single Wheel Application
• (4) four - 16” x 6” Single Wheels (8 Hole on 6 1/2" Bolt Circle)
• (1) Pair - Mud Flaps
POLE BOLSTERS
• Front Bolster: 45”W Fixed (Mounted on Extendible Tongue)
• Center Bolster: 93”W Fixed 3” Double C-Channel Construction with 9” Stanchions
• Rear Bolster: 93”W Fixed 3” Double C-Channel Construction with 9” Stanchions
• Stanchions: (4) four – 9” Chain Adjusted, Sliding & Removable
• (4) four - Heavy Duty Ratchet Type Winch Binders with Breaker Bar
• (4) four - 15’ L x 4” W x 12000 lbs. Nylon Straps
REEL RACKS
• See Options List
TONGUE & HITCH
• 8” x 4” x 1/4" Wall Extendable Tongue with Lubricated Steel Wear Pads
• 6-Position Adjustable Hitch Plate
• 2 1/2" Lunette Eye, 35000 lbs. Capacity
• 3/8” x 36”L Galvanized Safety Chains with Safety Hooks and Anchor Shackles
Roller to aide in tongue extension
A-FRAME & JACK
• 7” Structural C-Channel Steel A-Frame
• Fixed Binkley, Model 48000 Drop Leg Jack, 12,000 lb. Static Load Capacity
MAIN FRAME
• 6” x 3” Tubular Steel Main Frame
• 10” x 6” Receiver Tube
• 7” x 3 “ Tubular Steel Crossmembers Under Center and Rear Bolsters
• 3” Structural C-Channel Crossmembers on 16” Centers Under Cargo Bed Floor
CARGO BED
• Interior Dimensions: 130”L x 90”W x 10”H
• Floor: 1/8” Smooth Steel Construction
• Side Gates: (4) four Drop Down with Offset Hinges so Debris is Easily Cleared
• (4) four - 5/8” D-Rings, 19,000 lbs. Capacity each, Mounted (1) one each Corner Post
12 VOLT WIRING SYSTEM
• ICC & DOT Approved Lights
• Sealed Beam Rubber Mounted Stop, Turn, Tail and Marker Lights
• S.O. Cable Wiring Loom, Clamped on 16” Centers with Rubber Lined Clamps
• Wiring Loom Terminated in Junction Boxes
• Connections Soldered and Sealed with Heat Shrink Tubing
• Internal Wiring in Tongue Extension, Receptacle at Each Pin Location
• 32” Pigtail w/ 6-Way Aluminum Die Cast Plug, Terminated at Junction Box
• 6-Way Aluminum Die Cast Plug (Truck Side) in Rear Butt Tube for Light Bar Hook-Up
• Breakaway Kit with Sealed lead Acid Battery & Trickle Charger
PAINT
• Trailer is Completely Sandblasted
• Seams are Sealed with Paintable Caulk
• Rust Prohibitive Two-Part Epoxy Polyamide Primer
• Two-Part Acrylic Polyurethane Topcoats (Standard Colors White and Safety Yellow)
• All Attachments Painted before Assembly and Installed with Serviceable Fasteners
Options
AXLE OPTIONS
- 7000 lb. Tandem - Payload: 12,000 lbs. GVWR 16,000 lbs.
12" x 2" Electric Brakes
(4) four - ST235/80R16 LR-E, (14 Ply) Capacity 3,520 lbs. - 8000 lb. Tandem - Payload: 14,500 lbs. GVWR 18,500 lbs.
12 1/4" x 3 3/8" Electric Brakes
(4) four - 215/75R/17.5 LR-H, Capacity 4,805 lbs.
OPTIONAL SPARE TIRE & WHEEL
- ST235/80R16 LR-E (6 & 7K Axle)
- 215/75R/17.5 LR-H (8K Axle)
- Rubber Wheel Chocks, 7"H x 10"L x 8"W
BOLSTER OPTIONS
- 64"W Tubular Bolster,
Pole Stops, Winch Binder and Nylon Strap (In Lieu of 45" Front Bolster) - U-Type Single Pole Cradle
Winch Binder and Nylon Strap (In Lieu of 45" Front Bolster) - 60"W (45" ID) 3" Double C-Channel Bolster, Winch Binder and Nylon Strap (In Lieu of 45" Front Bolster):
with 9" Chain Adjusted Stanchions
with 21" Lever Lock Stanchions
(4) - 30' L Nylon Winch Strap in Lieu of 15' - (4) four - 21" Lever Lock Stanchions, Sliding and Removable
in Lieu of Standard 9" Chain Adjusted Stanchions
Installed on Center and Rear Bolsters
REMOVABLE REEL RACKS OPTIONS
- Idler Rack Package:
Complete Two Reel Assembly
(2) Removable 2 7/8" Reel Bars with Crossarm and (1) Locking Collar
Bronze Bushings with Retainer Cap, Pull Pin and Spring Clip
Removable Tubular Construction Frame with (4) Lifting Eyes
(4) Receiver Pockets on Trailer, Pull Pins and Spring Clip
Maximum Reel Size each 72"D x 4,500 lbs x Width 48" to 60" - 12" Tension Brake Package:
Complete Two Reel Assembly
(2) 12" (Medium Duty) Tension Brakes w/ 12"D x 5/8" Solid Bronze Disc
Cast Steel Caliper with Tension Adjust Handle
(2) Removable 2 7/8" Reel Bars with Crossarm and (1) Locking Collar
Bronze Bushings with Retainer Cap, Pull Pin and Spring Clip
Removable Tubular Construction Frame with (4) Lifting Eyes
(4) Receiver Pockets on Trailer, Pull Pins and Spring Clip
Maximum Reel Size each 72'D x 4,500 lbs x Width 48" to 60" - 16" Tension Brake Package
Complete Two Reel Assembly
(2) 16" Tension Brakes w/ 16"D x 3/4" Solid Bronze Disc
Cast Steel Caliper with Tension Adjust Handle
(2) Removable 2 7/8" Reel Bars with Crossarm and (1) Locking Collar
Bronze Bushings with Retainer Cap, Pull Pin and Spring Clip
Removable Tubular Construction Frame with (4) Lifting Eyes
(4) Receiver Pockets on Trailer, Pull Pins and Spring Clip
Maximum Reel Size each 72"D x 4,500 lbs x Width 48" to 60"
HITCH & JACK OPTIONS
- 3" Lunette Eye (In Lieu of 2 1/2" Eye)
- Visible Registration Holder
- Jack Handle Extension:
Add to One Side
Add to Both Sides (Requires Store-Away Handle)
CARGO BED OPTIONS
- Additional D-Rings
WIRING & LIGHT BAR OPTIONS
- Light Bar
(2) Rubber Mounted Sealed Beam Lights (Stop Turn and Tail)
36"L x 4" x 4" Tubular Steel Body
Chain Adjusted Mounting Base
25' of Cable with 6-Way Aluminum Die Cast Connector - Warner 6-Way Connector
in Lieu of Standard 6-Way Connector - Solar Charged Breakaway Kit
In Lieu of Standard Kit