3RT
Ask about our self-contained power units and guide-system rollers (see photos).
CAPACITY
14,000 lbs. GVWR – Calculated at 15% Weight Transfer to Tow Vehicle
10,000 lbs. Load Capacity
DIMENSIONS
Overall Length: 27’
A-Frame: 5’
Cargo Bed: 22’6”L x 72”W x 15”H
Overall Width: 101”
Reel Size: (3) three x 84”D x 60”W x 3” Center Hole
AXLES
6000 lbs. Tandem rubber torsion axles – (Optional Axles: 7000 lb. & 8000 lb.)
Electric Brakes on All Wheels
(4) four – ST235/80R16 LR-E Tires, Capacity 3,042 lbs. each, Single Wheel Application
(4) four – 16” x 6” Single Wheels (8 Hole on 6 1/2″ Bolt Circle)
(1) Pair – Mud Flaps
REEL RACKS
(3) three – Fixed w/ Heavy Duty Bronze Bearings, Retainer Cap, Pull Pin & Spring Clip
(3) three – 2 7/8” Reel Bar with Crossarm and (1) Locking Collar
TONGUE, HITCH & JACK
5” x 3” Tubular Steel A-Frame
6-Position Adjustable Hitch Plate (14” through 27”)
2 1/2″ Lunette Eye, 35000 lbs. Capacity
3/8” x 36”L Safety Chains with Safety Hooks and Anchor Shackles
Drop Leg Jack, 12,000 lb. Static Load Capacity
MAIN FRAME
5” x 3” Tubular Steel Main Frame
5” x 3 “ Tubular Steel Crossmembers at Front of Cargo Bed
6” x 3 “ Tubular Steel Crossmembers at Rear of Cargo Bed
CARGO BED
12 Gauge Smooth Steel Floor
3” C-Channel & 3” Angle Crossmembers on 24” Centers
Sides – 12 Gauge Steel with 3”x3” Tubular Steel Top Rail & 5”x3” Lower Rail
12”H x 2”W Vertical Guide Slots for Drop-in 2”W Lumber for Removable Tailgate
FENDERS
Fabricated 1/8” Steel Diamond Tread Plate Fenders
Integrated Construction with Cat Walks
TOOL BOX
Tool Box Dimensions: 14”H x 13”D x 78” Contoured to A-Frame
Fabricated 1/8” Smooth Steel Intergraded Construction
Lift-Up Lid with Security Hasp for Padlock
12 VOLT WIRING SYSTEM
ICC & DOT Approved LED Lights
Sealed Beam Rubber Mounted Stop, Turn, Tail and Marker LED Lights
S.O. cable wiring harness run internally wherever possible. External wiring is clamped on 16″ centers with rubber lined clamps
Wiring Loom Terminated in Junction Boxes
Connections Soldered and Sealed with Heat Shrink Tubing
32” Pigtail w/ 6-Way Aluminum Die Cast Plug, Terminated at Junction Box
Breakaway Kit with Sealed Lead Acid Battery & Trickle Charger
PAINT
Trailer is Completely Sandblasted
Seams are Sealed with Paintable Caulk
Rust Prohibitive Two-Part Epoxy Polyamide Primer
Two-Part Acrylic Polyurethane Topcoats (Standard Colors White and Safety Yellow)
All Attachments Painted before Assembly and Installed with Serviceable Fasteners