3TRT-Hydraulic
CAPACITY
38,500 # GVWR
DIMENSIONS
Overall Length: 30′
A-Frame: 6′
Cargo Bed: 24’L x 70″W Max
Overall Width: 101″ Max
Reel Size: (3) Three 84″D x 60″W x 3″ Center Hole
AXLES
12,000# Tandem Axles
Leaf Spring Suspension
Electric Brakes on All Wheels
(4) Four – 235/75R17.5 LR-H Tires
(4) Four – 17.5″ x 6.75″ Single Wheels
(1) Pair Mud Flaps
(2) Pair Wheel Holders with Rubber Wheel Chocks – Chain Restraints
REEL RACKS
(3) Three -Revolving Galvanized Turret Reel Assemblies Lockable Every 15 Degrees with Heavy Duty Slew Rings
(2) Full Width Rollers on each Turret Assembly – Six Total
(3) Three – 2 7/8″ Reel Bars with Crossarm and (1) One Locking Collar, Rotating in Heavy Duty Bronze Bearings, 6,000 lb capacity
(3) Three – 16″ HD Tensioning Brakes – Hydraulically Actuated
TONGUE, HITCH & JACKS
Registration Holder – Aluminum 9″ Tube Type
6″ x 3″ x 1/4″ Steel Tube
6-Position Adjustable Hitch Plate (14″ through 27″)
3″ Lunette Eye
1/2″ x 36″L Galvanized Safety Chains
12,000 lb Drop Leg Jack – A-Frame
(4) Hydraulic Jacks – All Four Corners
Each Jack Must Operate Independently
4 Lever Valve Mounted Curbside on A-Frame
Provide No-Leak Hydraulic Quick Disconnects
Each Jack to Have Ground Pad with Rope at Least Twice as Big as Jack Foot
Storage Locations to be Provided for each Ground Pad
MAIN FRAME
10″ x 3″ x 1/4″ Steel Tube
3″ C-Channel Crossmembers
6″ C-Channel Crossmembers Under Turret Assemblies
(4) Stainless Steel Grounding Lugs Located Both Sides, One at Front and One at Rear
Adjustable, Removable Three Roller Fairlead at Rear of Trailer
Storage on Fender for Removable Fairlead Assembly
CARGO BED
1/8″ Steel Tread Plate Deck
Line Cargo Bed With Speed Liner
(4) Access Steps, In Front and Behind Fenders Both Sides
FENDERS
Fabricated 1/8″ Steel Diamond Tread Plate Fenders
Steel Treadplate Catwalks Fore and Aft of Fenders
Conspicuity Tape, Both Sides, Rear and Tongue, Meets DOT and NHTSA Standards