Print

4DP-4000 Planetary Drive


4DP4K-8KE Diesel

UNIT PERFORMANCE:
RATED LINE PULL:  4,000 LBS. FULL DRUM
LINE SPEED:  2-3 MPH

GVWR: 18,800 lbs.
Curb Weight: 18,140 lbs.
Tongue Weight: 2,100 lbs. 

REAL CAPACITY:
12,000 FT. OF 5/8" DIAMETER 12 STRAND SINGLE BRAID PULLING ROPE
  
LEVELWIND:
HYDRAULICALLY ACTUATED WITH A SINGLE LEVER/DETENTED CONTROL VALVE, AND ADJUSTABLE NEEDLE VALVE FOR SPEED CONTROL

POWER TRAIN / HYDRAULICS:
CLOSED LOOP HYDRAULIC SYSTEM
PRESSURE COMPENSATING PUMP

OPERATOR / SAFETY FEATURES
SPRING APPLIED HYDRAULIC PRESSURE RELEASED SAFETY BRAKE
ALL UNIT OPERATOR CONTROLS ARE LOCATED AT THE OPERATOR’S STATION, OFF GROUND
OPERATORS SEAT
SAFETY SCREEN
16” OVERSPIN BRAKES FOR ROPE PAYOUT - HYDRAULIC OR MANUAL OPERATION
(2) GROUNDING  LUGS MOUNTED FRONT, EACH SIDE
EACH DRUM CAN BE INDEPENDENTLY LOCKED DOWN EITHER BY HYDRAULIC PRESSURE AT THE CONTROL PANEL OR MECHANICALLY AT GROUND LEVEL

CONTROL PANEL:
-ELECTRIC START IGNITION SWITCH
-ENGINE THROTTLE ADJUSTMENT
-TACHOMETER
-HOUR METER
-LOW OIL AND PRESSURE LIGHTS
-LEVER ACTUATED DIRECTION AND SPEED CONTROL
-EMERGENCY STOP BUTTON FOR ENGAGEMENT OF HYDRAULIC SAFETY BRAKE

CAPACITY & DIMENSIONS:   
14,000 LBS. GVWR – CALCULATED AT 15%  WEIGHT TRANSFER TO TOW VEHICLE
OVERALL LENGTH  15’ 8”
A-FRAME  5’
OVERALL WIDTH  101”  
WEIGHT  APPROX. 6,000 LBS.

AXLES:                                    
8,000 LBS.LEAF SPRING AXLES
12” X 2” ELECTRIC BRAKES ON ALL WHEELS
(4) ST235/80R16 LR-E TIRES
(4) 16” X 6” SINGLE WHEELS (8 HOLE ON 6 ½” BOLT CIRCLE)
(1) PAIR MUD FLAPS
    
TONGUE, HITCH & JACK:    
5” X 3” TUBULAR STEEL A-FRAME
6 – POSITION ADJUSTABLE HITCH PLATE ( 14” THROUGH 27” )
2 1/2” LUNETTE EYE.  35,000 LBS. CAPACITY
3/8” X 36” L GALVANIZED SAFETY CHAINS WITH SAFETY HOOKS AND ANCHOR SHACKLES
A-FRAME MOUNTED HYDRAULIC JACK

MAINFRAME:                          
5” X 3” TUBULAR STEEL MAIN FRAME
5” X 3” TUBULAR STEEL CROSSMEMBERS AT FRONT, REAR OF BED
3” C-CHANNEL CROSSMEMBERS ON 24” CENTERS
(2) REAR HYDRAULIC STABILIZING JACKS
(1) PAIR WHEEL CHOCK HOLDERS WITH RUBBER WHEEL CHOCKS
   
TOOL BOX:                             
14” H X 13” D 78” L  
FABRICATED 1/8” SMOOTH STEEL INTEGRATED CONSTRUCTION
LIFT-UP LID WITH SECURITY HASP FOR PADLOCK
   
12 VOLT WIRING SYSTEM:  
ICC & DOT APPROVED LED LIGHTS
SEALED BEAM RUBBER MOUNTED STOP, TURN, TAIL AND MARKER LIGHTS
S.O. CABLE WIRING LOOM, CLAMPED ON 16” CENTERS WITH RUBBER LINED CLAMPS
WIRING LOOM TERMINATED IN JUNCTION BOXES
CONNECTIONS SOLDERED AND SEALED WITH HEAT SHRINK TUBING
32” PIGTAIL WITH 6-WAY OR 7-WAY STYLE ELECTRICAL PLUG

PAINT:                                     
TRAILER IS COMPLETELY STEEL GRIT BLASTED
SEAMS ARE SEALED WITH PAINTABLE CAULK
RUST PROHIBITIVE TWO-PART EPOXY POLYAMIDE PRIMER
TWO-PART ACRYLIC POLYURETHANE TOPCOATS                                 
ALL ATTACHMENTS PAINTED BEFORE ASSEMBLY AND INSTALLED
WITH SERVICEABLE  FASTENERS


Options