ECO-8000 Electric Puller
UNIT PERFORMANCE:
RATED LINE PULL: 8,000 lb. UNDERGROUND PULLER
2,500 FT. 3/8” HD 3 Strand Anti-Rotation Pulling Cable
AUTO – LEVELWIND: LEAD SCREW DESIGN
SELF SUPPORTED BOOM:
HYDRAULICALLY ACTUATED W/20″ EXTENSION: ADJUSTABLE UP DOWN, LEFT RIGHT, EXTENDING OUT
AND IN – TO CENTER OVER DUCT WORK – NO JACK REQUIRED ON BOOM
E-Cell Electric Engine:
-Liquid Cooled Lithium (LiFeP04) Battery Pack
-33 kwh storage capacity
-6 hour charge time at 240V & 12 hour at 120V
-Hi Efficiency DC Permanent Magnet Motor
-5″ Color Operator Screen
-Status Display for Real Time Data of E-Cell
-Diagnostics for Easy and Intuitive Maintenance
FULLY HYDROSTATIC DRIVE PUMP
HYDRAULIC DRIVEN 10” TWIN CAPSTAN BULLWHEELS – CONSTANT PULLING CAPACITY OF 8,500 LBS.
AVAILABLE FOOTAGE COUNTER
ELECTRONIC DYNAMOMETER TO METER ACTUAL PULLING TENSIONS, SPEED, DISTANCE AND LINE
TENSION WITH USB PORT OR WITH USB OUTPUT TO TRANSFER DATAREED OUT FOR PULLING TENSIONS
OPERATOR / SAFETY FEATURES:
ALL UNIT OPERATOR CONTROLS ARE LOCATED AT THE OPERATOR’S STATION, OFF GROUND
OPERATORS SEAT MOUNTED IN REAR
CAPACITY & DIMENSIONS:
OVERALL FRAME LENGTH 151” [APPROX.]
OVERALL WIDTH 90’’
WEIGHT APPROX. 7,000 LBS.
AXLES:
8,000 LBS. SINGLE TORSION AXLE
12-1/4” X 3-3/8” ELECTRIC BRAKES ON ALL WHEELS
(2) 215/75R17.5 LR-H TIRES
(2) 17.5” X 6” SINGLE WHEELS (8 HOLE ON 6 ½” BOLT CIRCLE)
(1) PAIR MUD FLAPS
TONGUE, HITCH & JACK:
5” X 3” TUBULAR STEEL A-FRAME
6 – POSITION ADJUSTABLE HITCH PLATE (14” THROUGH 27” )
2 1/2” LUNETTE EYE 35,000 LBS. CAPACITY
3/8” X 36” L GALVANIZED SAFETY CHAINS WITH SAFETY HOOKS AND ANCHOR SHACKLES
TONGUE JACK AND REAR JACKS – HYDRAULICALLY ACTUATED W/DUAL LOCKING VALVESMAINFRAME:
7” X 3” TUBULAR STEEL MAIN FRAME
7” X 3” TUBULAR STEEL CROSSMEMBERS AT FRONT, REAR OF BED
TUBULAR CROSSMEMBERS ON 24” CENTERS
12 VOLT WIRING SYSTEM:
ICC & DOT APPROVED LED LIGHTS
SEALED BEAM RUBBER MOUNTED STOP, TURN, TAIL AND MARKER LIGHTS
S.O. CABLE WIRING LOOM, CLAMPED ON 16” CENTERS WITH RUBBER LINED CLAMPS
WIRING LOOM TERMINATED IN JUNCTION BOXES
CONNECTIONS SOLDERED AND SEALED WITH HEAT SHRINK TUBING
32” PIGTAIL WITH 6-WAY OR 7-WAY RV TYPE PLUG
*Duct Rollers: 3″, 4″, 5″, & 6″
*Wireless Remote Control Upgrade
PAINT:
Trailer is Completely Steel Grit Blasted
Seams are Sealed with Paintable Caulk
Rust Prohibitive Two-Part Epoxy Polyamide Primer
Two-Part Acrylic Polyurethane Topcoats – White
All Attachments Painted before Assembly & Installed with Serviceable Fasteners
